دوره 4، شماره 2 - ( پاییز و زمستان 1402 )
جلد 4 شماره 2 صفحات 23-11 |
برگشت به فهرست نسخه ها
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Mirzaee M. (2023). A Review of the Design and Testing of Air Preheater Elements in Steam Power Plants. jste. 4(2), 11-23. doi:10.61186/jste.4.2.11
URL: http://yujs.yu.ac.ir/jste/article-1-127-fa.html
URL: http://yujs.yu.ac.ir/jste/article-1-127-fa.html
میرزائی مجید. مروری بر طراحی و آزمون‌های عناصر پیش گرمکن هوا در نیروگاه های بخار نشریه مباحث برگزیده در انرِژی 1402; 4 (2) :23-11 10.61186/jste.4.2.11
پژوهشگاه نیرو ، mjmirzaei@nri.ac.ir
چکیده: (178 مشاهده)
این مقاله به بررسی تئوری ها و پیچیدگی های مربوط به طراحی پیش گرمکن هوا و سطوح انتقال حرارت استفاده شده در آنها می پردازد. تحقیقات متعددی برای درک چگونگی طراحی پیش گرمکن هوا و پارامترهای عملکرد مرتبط با آن انجام شده است. پیش گرمکن مبدل های حرارتی هستند که برای پیش گرم کردن هوا قبل از انجام هر فرآیند دیگری استفاده می شوند. پیش گرم کن کاربرد گسترده ای در نیروگاه ها، خودروها و همه مناطقی از این قبیل دارد که نیاز به گرم کردن هوا و صرفه جویی در سوخت دارد. همچنین بررسی کاملی بر روی عناصر گرمایشی یا سطوح مورد استفاده در پیش گرم کن های هوا برای انتقال گرما بین سیال سرد و گرم انجام می شود. ابتدا انواع مختلفی از پروفیل های پرکاربرد شناسایی و سپس تحقیقاتی برای یافتن چگونگی بررسی تجربی صفحات انتقال حرارت انجام می شود. گزیده هایی نیز در رابطه با طراحی تنظیمات تجربی برای همین موضوع و وابستگی پارامترهای مختلف به یکدیگر ارائه شده است.
فهرست منابع
1. [1] P. Sapkal, P. Baviskar, M. Sable, and S. Barve, "To optimise air preheater design for better performance," NEW ASPECTS of FLUID MECHANICS, HEAT TRANSFER and ENVIRONMENT. ISSN, vol. 4596, pp. 61-69, 1792
2. [2] H. Wang, L. Zhao, Z. Xu, and H. Kim, "Analysis on thermal stress deformation of rotary air-preheater in a thermal power plant," Korean Journal of Chemical Engineering, vol. 26, pp. 833-839, 2009. [DOI:10.1007/s11814-009-0139-1]
3. [3] H. Y. Wang, L. L. Zhao, Z. G. Xu, W. G. Chun, and H. T. Kim, "The study on heat transfer model of tri-sectional rotary air preheater based on the semi-analytical method," Applied Thermal Engineering, vol. 28, no. 14-15, pp. 1882-1888, 2008. doi: org/10.1016/j.applthermaleng.2007.11.023 [DOI:10.1016/j.applthermaleng.2007.11.023]
4. [4] J. Subramaniyan and S. Venkatachalapathy, "Heat transfer studies at different speeds and loads of regenerative air preheater in thermal power plant," Thermal Science and Engineering Progress, vol. 22, p. 100814, 2021. [DOI:10.1016/j.tsep.2020.100814]
5. [5] H. Hajebzadeh and A. N. Ansari, "Modification of rotary air preheater toward achieving extended life-span utilizing porous media approach: A case study," Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, vol. 236, no. 2, pp. 293-307, 2022. [DOI:10.1177/09576509211034977]
6. [6] I. Warren, "Ljungstrom heat exchangers for waste heat recovery," Journal of Heat Recovery Systems, vol. 2, no. 3, pp. 257-271, 1982. [DOI:10.1016/0198-7593(82)90019-4]
7. [7] A. Heidari-Kaydan and E. Hajidavalloo, "Three-dimensional simulation of rotary air preheater in steam power plant," Applied Thermal Engineering, vol. 73, no. 1, pp. 399-407, 2014. [DOI:10.1016/j.applthermaleng.2014.08.013]
8. [8] S. Suwarno, G. Nugroho, and A. Santoso, "Failure analysis of air preheater tubes in a circulating fluidized bed boiler," Engineering Failure Analysis, vol. 124, p. 105380, 2021. [DOI:10.1016/j.engfailanal.2021.105380]
9. [9] A. Di Gianfrancesco, "The fossil fuel power plants technology," in Materials for ultra-supercritical and advanced ultra-supercritical power plants: Elsevier, 2017, pp. 1-49. [DOI:10.1016/B978-0-08-100552-1.00001-4]
10. [10] N. Manivasakam, Industrial Water Analysis Handbook. Chemical Publishing, 2005.
11. [11] K. V. Baba, P. P. MOHAN, and T. J. Kumar, "CFD Modelling And Simulation of 500MW Bisector Air preheater and Its Performance," work, vol. 3, no. 11, 2016.
12. [12] M. Zeng, L. Du, D. Liao, W. Chu, Q. Wang, Y. Luo, and Y. Sun, "Investigation on pressure drop and heat transfer performances of plate-fin iron air preheater unit with experimental and Genetic Algorithm methods," Applied energy, vol. 92, pp. 725-732, 2012. [DOI:10.1016/j.apenergy.2011.08.008]
13. [13] H. Chen, P. Pan, H. Shao, Y. Wang, and Q. Zhao, "Corrosion and viscous ash deposition of a rotary air preheater in a coal-fired power plant," Applied Thermal Engineering, vol. 113, pp. 373-385, 2017. [DOI:10.1016/j.applthermaleng.2016.10.160]
14. [14] S. Vulloju, E. M. Kumar, M. S. Kumar, and K. K. Reddy, "Analysis of performance of Ljungstrom air preheater Elements," Int. J. Curr. Eng. Technol, vol. 2, no. 2, pp. 501-505, 2013. [DOI:10.14741/ijcet/spl.2.2014.94]
15. [15] Y. Shi, J. Wen, F. Cui, and J. Wang, "An optimization study on soot-blowing of air preheaters in coal-fired power plant boilers," Energies, vol. 12, no. 5, p. 958, 2019. [DOI:10.3390/en12050958]
16. [16] G. Shruti, R. Bhat, and G. Sheri, "Performance evaluation and optimization of air preheater in thermal power plant," International Journal of Mechanical Engineering and Technology (IJMET), vol. 5, no. 9, pp. 22-30, 2014.
17. [17] A. Maharaj, W. Schmitz, R. Naidoo, L. Jestin, W. Fuls, and M. Pronobis, "A numerical study of air preheater leakage," Energy, vol. 92, pp. 87-99, 2015. [DOI:10.1016/j.energy.2015.06.069]
18. [18] H. Jouhara, N. Khordehgah, S. Almahmoud, B. Delpech, A. Chauhan, and S. A. Tassou, "Waste heat recovery technologies and applications," Thermal Science and Engineering Progress, vol. 6, pp. 268-289, 2018. [DOI:10.1016/j.tsep.2018.04.017]
19. [19] R. Kumar and S. Jain, "Performance Evaluation of air pre heater at off design condition," Dept of Mech. Engg., IIT, New Delhi, pp. 1-4, 2006.
20. [20] M. Cai, X. Wang, S. Zhao, and S. He, "A study on the direct leakage of rotary air preheater with multiple seals," Applied thermal engineering, vol. 59, no. 1-2, pp. 576-586, 2013. [DOI:10.1016/j.applthermaleng.2013.05.049]
21. [21] "Basketed Elements In Products by Paragon Technology. Retrieved from http://www.paragonair-heater.com/products_basketed_elements." (accessed.
22. [22] E. Elshafei, M. Awad, E. El-Negiry, and A. Ali, "Heat transfer and pressure drop in corrugated channels," Energy, vol. 35, no. 1, pp. 101-110, 2010. [DOI:10.1016/j.energy.2009.08.031]
23. [23] D. Butrymowicz et al., "Methodology of heat transfer and flow resistance measurement for matrices of rotating regenerative heat exchangers," Chemical and Process Engineering, vol. 37, no. 3, pp. 341-358, 2016. [DOI:10.1515/cpe-2016-0028]
24. [24] D. S. Patel, M. D. Patel, and S. A. Thakkar, "To optimize the design of the basket profile in Ljungstrom air preheater," International Research Journal of Engineering and Technology (IRJET), vol. 3, no. 5, p. 6, 2016.
25. [25] M. Ciofalo, I. Di Piazza, and J. Stasiek, "Investigation of flow and heat transfer in corrugated-undulated plate heat exchangers," Heat and Mass Transfer, vol. 36, no. 5, pp. 449-462, 2000. [DOI:10.1007/s002310000106]
26. [26] D. Butrymowicz et al., "Analysis and experimental investigations of selected types of heating elements of rotational air preheaters OPP in terms of geometry and thermal and flow characteristics," Technical Report, 2012.
27. [27] C. Liang and W.-J. Yang, "Modified single-blow technique for performance evaluation on heat transfer surfaces," 1975. [DOI:10.1115/1.3450280]
ارسال پیام به نویسنده مسئول
| بازنشر اطلاعات | |
 |
این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است. |
