Search published articles


Showing 2 results for Zare

Mohammad Hassan Shojaei Fard , Mojtaba Tahani , Ali Mahtab , Javad Zare ,
Volume 3, Issue 2 (12-2017)
Abstract

 

In this work thermal performance of a cylindrical heat pipe at steady state has been investigated empirically. The used heat pipe, made of copper, has been designed and manufactured by considering effective parameters on heat pipe thermal performance. Then heat pipe has been charged by water as the working fluid. By installing sensors and the other equipment, the test set up has been prepared. After preparing the test set up by changing voltage, various input powers have been inserted into evaporator and the heat pipe surface temperature distribution has been obtained for each case. Then by using the obtained temperature distributions, thermal resistance variations and equivalent thermal conductivity coefficient have been computed. and variation of them versus input power have been plotted. The results show that the thermal resistance has its minimum value at maximum operating limit (maximum passing power) and equivalent thermal conductivity has its maximum value at this point.
 

 
Shahram Derakhshan, Ehsan Abdolahnejad, Javad Zare,
Volume 3, Issue 2 (12-2017)
Abstract

Nowadays, according to increasing energy consumption especially in industry, the need for optimizing energy consumption and determining energy efficiency class of different devices is essential. The main challenge of the present study is developing an energy label instruction for centrifugal pumps. Since the used standard in Iran (ISIRI 7817-2, 1st.edition) only considers the effect of efficiency in energy labeling, a new method is presented to modify this standard. In the proposed method the effect of specific speed on efficiency is considered by choosing one of the constant specific speed curves in η- Q diagram and modifying efficiency for each specific speed. Then, different pumps are tested and labeled by different standards. While the used standard in Iran labels all the pumps in one class, but the new proposed method can label pumps properly as European standards that show the benefit of using the proposed method in centrifugal pumps energy labeling.
 



Page 1 from 1     

© 2024 CC BY-NC 4.0 | Journal of Selected Topics in Energy

Designed & Developed by : Yektaweb