Volume 3, Issue 1 (9-2017)
jste 2017, 3(1): 1-7 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Lashanizadegan A, Rahimi M, Mazlumi H. (2017). Potential of Energy Saving in The Furnaces. jste. 3(1), 1-7.
URL: http://yujs.yu.ac.ir/jste/article-1-76-en.html
URL: http://yujs.yu.ac.ir/jste/article-1-76-en.html
M.Sc. Student in Chemical Engineering, Yasouj University, Yasouj, Iran , hadie.mazlumi@yahoo.com
Abstract: (7057 Views)
Furnaces in refinery and petrochemical processes are major consumers of energy. The most important factors for the controlling the energy consumption of the furnace can be divided into three main groups The first group includes the potential savings without cost or low cost, such as adjusting air – fuel ratio in the burner and pressure control into the furnace, The second group includes the potential savings with medium cost such as insulating body, and the third group includes the potential savings with high investment such as heat recovery from the exhaust flue. In this paper, the thermal energy savings potential on the 4 fixed- furnaces in the Loabiran companies are investigated and calculated that savings potential of adjusting air – fuel ratio in the burner is 165,973,500 Rials in the year, controlling pressure inside the furnace 95,822,300 Rials in the year, body insulation 622,167,700 Rials and recycled flue gases 929,762,400 Rials in the year. Also Loabiran companies uses regenerator that is a periodic heat recovery system to preheat the incoming air. This will result in annual savings for the daily production of 20 tons of frit, are 3,577,000,000 Rials.
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
