Search published articles
Showing 263 results for Type of Study: Research
Haniyeh Saadat, Mohammad Sedghi,
Volume 12, Issue 1 (4-2025)
Volume 12, Issue 1 (4-2025)
Abstract
Objective: This study aimed to evaluate the effect of chitosan on germination indicators and the activity of antioxidant enzymes in safflower seedlings under salinity stress.
Method: The experiment was conducted using a factorial arrangement based on a completely randomized design with three replications at the University of Mohaghegh Ardabili in 2024. The experimental treatments included four salinity levels (0, 50, 100, and 150 mM NaCl) and four concentrations of chitosan (0, 0.2, 0.4, and 0.5% w/v), which were dissolved in 1% acetic acid.
Results: The results showed that salinity stress reduced the germination rate, radicle length, plumule length, seedling length, seedling fresh weight, and seedling dry weight. However, priming with different concentrations of chitosan, especially at 0.5%, improved these traits. The highest daily germination rate (0.114) was observed in the control group (distilled water priming) under 150 mM salinity. The activity of catalase and peroxidase enzymes in the control under 150 mM salinity increased by approximately 43% and 70%, respectively, compared to the 0.5% chitosan treatment under non-saline conditions. Similarly, the activity of superoxide dismutase enzyme in the 0.5% chitosan treatment under 150 mM salinity increased by about 67% compared to the control under non-saline conditions. Furthermore, the ascorbate peroxidase enzyme activity in seeds primed with 0.5% chitosan increased by 37% compared to the control (distilled water priming).
Conclusions: The results indicated that seed treatment with different concentrations of chitosan can mitigate the harmful effects of salinity on some traits of safflower seedlings and improve seedling growth. The best results were achieved when 0.5% chitosan was used under salinity conditions.
Highlights
- Safflower seed priming using 0.5% chitosan improved the germination indices of safflower seeds under salinity stress.
- Safflower seed priming with 0.5% chitosan increased the activity of the superoxide dismutase and ascorbate peroxidase enzymes.
- Priming with chitosan had a better effect on the germination indices and biochemical characteristics of safflower seeds compared to the control.
Hamid Zolghadri, Salim Farzaneh, Mohammad Ahmadi, Raouf Sayed Sharifi,
Volume 12, Issue 1 (4-2025)
Volume 12, Issue 1 (4-2025)
Abstract
Objective: This study aimed to investigate the effects of hydroprime and seed coating with humic acid, and biological compounds on the germination and emergence of the sweet corn cultivar 'Amyla'.
Method: The experiment was conducted using a randomized complete block design with three replications under laboratory and greenhouse conditions, and four replications under field conditions in 2018. The study was carried out at Mohaghegh Ardabili University and the experimental fields of the National Agro-Industrial Company of Moghan. The fourteen treatments consisted of seed coating with different amounts of amino acid fertilizer (2, 4, and 6 g kg-1 of seed), seaweed extract (3, 6, and 9 g kg-1 of seed), humic acid (3, 6, and 9 g kg-1 of seed), hydroprime + humic acid, hydroprime + seaweed extract, hydroprime + amino acid, hydroprime alone, and an uncoated control. A 3% carboxymethylcellulose solution was used as an adhesive for the seed coating.
Results: Seed coating with humic acid and hydroprime significantly improved the germination and emergence percentages of the 'Amyla' sweet corn seeds under laboratory, greenhouse, and field conditions. The best results were obtained with the hydroprime and humic acid (6 g kg-1) treatments, which showed the highest germination percentage (98.66%) and emergence percentage (93.33%). The germination and emergence rates also increased significantly in these treatments. Contrary to expectations, seaweed extract negatively affected the germination and emergence of the sweet corn seeds. These results indicate that using seaweed extract as a seed coating may not be suitable for all corn cultivars. The 3% carboxymethylcellulose adhesive used for coating had no adverse effect on seed germination and emergence; in some cases, it even slightly improved the results.
Conclusions: This research clearly demonstrates that coating 'Amyla' sweet corn seeds with humic acid (6 g kg-1) and hydroprime is not only a practical solution for improving germination and seedling establishment but also, as a sustainable technology, can help address challenges in modern agriculture.
Highlights
Method: The experiment was conducted using a randomized complete block design with three replications under laboratory and greenhouse conditions, and four replications under field conditions in 2018. The study was carried out at Mohaghegh Ardabili University and the experimental fields of the National Agro-Industrial Company of Moghan. The fourteen treatments consisted of seed coating with different amounts of amino acid fertilizer (2, 4, and 6 g kg-1 of seed), seaweed extract (3, 6, and 9 g kg-1 of seed), humic acid (3, 6, and 9 g kg-1 of seed), hydroprime + humic acid, hydroprime + seaweed extract, hydroprime + amino acid, hydroprime alone, and an uncoated control. A 3% carboxymethylcellulose solution was used as an adhesive for the seed coating.
Results: Seed coating with humic acid and hydroprime significantly improved the germination and emergence percentages of the 'Amyla' sweet corn seeds under laboratory, greenhouse, and field conditions. The best results were obtained with the hydroprime and humic acid (6 g kg-1) treatments, which showed the highest germination percentage (98.66%) and emergence percentage (93.33%). The germination and emergence rates also increased significantly in these treatments. Contrary to expectations, seaweed extract negatively affected the germination and emergence of the sweet corn seeds. These results indicate that using seaweed extract as a seed coating may not be suitable for all corn cultivars. The 3% carboxymethylcellulose adhesive used for coating had no adverse effect on seed germination and emergence; in some cases, it even slightly improved the results.
Conclusions: This research clearly demonstrates that coating 'Amyla' sweet corn seeds with humic acid (6 g kg-1) and hydroprime is not only a practical solution for improving germination and seedling establishment but also, as a sustainable technology, can help address challenges in modern agriculture.
Highlights
- The effects of hydropriming and seed coating with humic acid, amino acid fertilizer, and seaweed extract on germination and emergence of 'Amyla' sweet corn cultivar were evaluated.
- The combination of hydropriming and humic acid coating (6 g kg⁻¹) was an optimal strategy for enhancing germination and seedling establishment of 'Amyla' sweet corn cultivar.
Farshid Ghaderi-Far, Majid Azimmohseni, Sima Sheikhveisi,
Volume 12, Issue 1 (4-2025)
Volume 12, Issue 1 (4-2025)
Abstract
Objective: This study introduces functional analysis of variance as a method for comparing germination trends under different treatments over a given time interval. This approach not only enables the comparison of treatments over the entire time period but also allows for treatment comparisons at each specific moment in time. Moreover, it identifies critical time points at which the maximum significant difference between treatments occurs, which can serve as novel germination indices.
Method: In this study, real experimental data from four germination studies were analyzed: (1) the effect of temperature on Nigella sativa germination, (2) the effect of salinity stress on Zea mays seed germination, (3) the comparison of germination among different Triticum astivum cultivars, and (4) the effect of water stress on Brassica napus germination. Using spline functions, germination data from these experiments were modeled as a function of time. The results of functional analysis were then used to compare treatments in terms of both germination percentage and germination time across the four experiments.
Results: The results of the functional analysis demonstrated its high efficiency in detecting significant or non-significant differences between treatments throughout the germination period. Furthermore, this method enabled comparisons of germination percentages at any given time point, as well as comparisons of germination times at various germination percentiles, providing detailed insights into the nature of differences among treatments. This approach also facilitated the introduction of new germination indices applicable to different seed types.
Conclusions: Overall, the results of this study indicate that the stepwise functional analysis method introduced here is an effective and precise tool for comparing treatments in germination data. This approach not only enhances treatment comparisons but also provides detailed insights into the nature of differences between treatments. Moreover, it overcomes the limitations associated with using conventional germination indices for treatment comparisons.
Highlights
- Functional analysis was applied to compare treatments in germination percentage data.
- The method enabled treatment comparisons in terms of germination percentage at each moment in time, as well as comparisons of germination times at various percentiles.
- Critical germination times and percentiles at which the maximum differences between treatments occur were introduced as novel germination indices.
Rafat Hassani Nassab Farzaneh, Ahmad Tobeh, Sodabeh Jahanbakhsh, Rasoul Fakhari, Mohammad Ahmadi,
Volume 12, Issue 1 (4-2025)
Volume 12, Issue 1 (4-2025)
Abstract
Objective: This experiment aims to evaluate relative fitness and seed germination indices of tribenuron-methyl sensitive and resistant wild mustard (Sinapis arvensis L.) biotypes under different temperature conditions and gibberellic acid concentrations.
Method: This experiment was conducted in 2023 at the laboratory of the University of Mohaghegh Ardabili. It was performed as a three-factorial arrangement in a completely randomized design (CRD) with three replications. The first factor consisted of two levels (seeds of tribenuron-methyl sensitive and resistant biotypes), the second factor included four levels of gibberellic acid concentration (500, 1000, 1500, and 2000 mg L-1), and the third factor comprised two temperature regimes: 20/15 °C and 15/10 °C (day/night). The measured parameters included germination percentage, germination rate and uniformity, seed water uptake, and seedling vigor index.
Results: The sensitive biotype of wild mustard exhibited a higher final germination percentage, and germination uniformity. The interactions of temperature × biotype and temperature × gibberellic acid concentration were significant on seed water uptake. Furthermore, the rate of water absorption by seeds was higher under the 10/15 °C temperature regime compared to the 20/15 °C (day/night) regime. The sensitive biotype showed a 1.8-fold higher germination rate and a 38% increase in seedling vigor compared to the resistant biotype.
Conclusions: These findings not only contribute to a deeper understanding of the mechanisms underlying herbicide resistance but also demonstrate that while resistance provides a selective advantage, it may entail a physiological cost in the long term. This fitness cost can be leveraged for sustainable weed management. Specifically, farmers could potentially delay wheat sowing—provided it does not compromise wheat yield—to create suboptimal temperature conditions that suppress the germination of resistant wild mustard biotypes. Furthermore, the slower water uptake observed in the resistant biotype suggests that strategic irrigation management could be employed to further inhibit its germination. Additionally, since the germination of resistant wild mustard is slower at lower temperatures, soil temperature monitoring can be utilized to predict the optimal timing for implementing mechanical control measures or post-emergence herbicide applications.
Highlights
- A simultaneous study of the effects of temperature and gibberellic acid on the germination and growth of herbicide-sensitive and herbicide-resistant wild mustard biotypes.
- Evaluation of the fitness cost in herbicide-resistant biotypes.
- Differential effects of growth-affecting factors on the phenotype of two wild mustard biotypes.
Nasrin Teimoori, Mohsen Saeidi, Mahmood Khoramivafa, Shahab Khoshkhoi,
Volume 12, Issue 1 (4-2025)
Volume 12, Issue 1 (4-2025)
Abstract
Objective: This study aimed to assess the efficiency of Zinc Oxide (ZnO) nanoparticles in mitigating salinity stress effects in comparison with bulk ZnO, and to examine the influence of different priming durations on chickpea seed germination under salinity conditions.
Method: The study was conducted as a factorial experiment in a completely randomized design with three replications on chickpea (Kasra cultivar). The first factor was the priming agent (1-100 nm ZnO nanoparticles, 40-60 nm ZnO nanoparticles, bulk ZnO, and hydro-priming). The second factor was the priming duration (6, 12, and 24 h), and the third factor was the level of salinity stress (0, 20, 40, and 80 mM NaCl). Key indicators related to germination quality and seedling growth were subsequently assessed.
Results: Salinity stress significantly affected the germination percentage, germination rate, mean germination time, mean daily germination, and seedling vigor weight index. The respective values at 0 and 80 mM NaCl were 98.7% vs. 68.4%, 15.6 vs. 10.4 germinated seeds per day, 2.11 vs. 2.39 days, 12.3 vs. 8.56 seeds per day, and 5466 vs. 1853. Salinity stress also significantly increased the root-to-shoot length ratio. Seed priming with 1-100 nm ZnO nanoparticles significantly increased seedling dry weight, shoot dry weight, root dry weight, and consequently, the seedling vigor index compared to other zinc forms and hydro-priming. Furthermore, this treatment reduced the percentage of abnormal seedlings to 20.7% under 80 mM NaCl. Priming durations of 12 and 24 h were superior to 6 h, resulting in a significant increase in seedling and shoot length, seedling and shoot weight, and the seedling vigor length index.
Method: The study was conducted as a factorial experiment in a completely randomized design with three replications on chickpea (Kasra cultivar). The first factor was the priming agent (1-100 nm ZnO nanoparticles, 40-60 nm ZnO nanoparticles, bulk ZnO, and hydro-priming). The second factor was the priming duration (6, 12, and 24 h), and the third factor was the level of salinity stress (0, 20, 40, and 80 mM NaCl). Key indicators related to germination quality and seedling growth were subsequently assessed.
Results: Salinity stress significantly affected the germination percentage, germination rate, mean germination time, mean daily germination, and seedling vigor weight index. The respective values at 0 and 80 mM NaCl were 98.7% vs. 68.4%, 15.6 vs. 10.4 germinated seeds per day, 2.11 vs. 2.39 days, 12.3 vs. 8.56 seeds per day, and 5466 vs. 1853. Salinity stress also significantly increased the root-to-shoot length ratio. Seed priming with 1-100 nm ZnO nanoparticles significantly increased seedling dry weight, shoot dry weight, root dry weight, and consequently, the seedling vigor index compared to other zinc forms and hydro-priming. Furthermore, this treatment reduced the percentage of abnormal seedlings to 20.7% under 80 mM NaCl. Priming durations of 12 and 24 h were superior to 6 h, resulting in a significant increase in seedling and shoot length, seedling and shoot weight, and the seedling vigor length index.
Conclusions: Salinity stress had significant adverse effects on germination and seedling growth characteristics and increased the proportion of abnormal seedlings. However, seed priming exerted a more pronounced positive effect on improving seedling growth and reducing the number of abnormal seedlings. Among the priming treatments, ZnO nanoparticles (1-100 nm) with a priming duration of 12 h were the most effective in enhancing seedling growth and the seedling vigor index, providing clear guidance for future research and applications.
Highlights
Highlights
- Seed priming at a salinity level of 20 mM significantly alleviated the adverse effects of salinity on seedling growth parameters.
- Seed priming of chickpea with zinc nanoparticles (1 to 100 nm) was more effective than other seed priming methods in promoting seedling growth.
- A priming duration of 12 h was identified as the optimal treatment for maximizing seedling growth and vigor index.
Nasrin Teimoori, Mohsen Saeidi, Mahmood Khoramivafa, Shahab Khoshkhoy,
Volume 12, Issue 1 (4-2025)
Volume 12, Issue 1 (4-2025)
Abstract
Objective: This study aimed to assess the efficiency of zinc oxid (ZnO) nanoparticles in mitigating drought stress effects in comparison with bulk ZnO, and to examine the influence of different priming durations on chickpea seed germination under drought conditions.
Method: A three-factorial experiment based on a completely randomized design was conducted with three replications on germination and seedling growth characteristics of chickpea cultivar Kasra. The factors included: 1) seed priming at 4 levels (priming with zinc oxide in the form of nanoparticles 1-100 and 40-60 nm, priming with bulk zinc oxide, and hydropriming), 2) priming duration at 3 levels (6, 12 and 24 hours) and 3) drought stress levels at 4 levels (no stress, -2, -4 and -8 bar using polyethylene glycol 6000).
Results: The results showed that drought stress had a significant effect on all measured variables. Although priming with nanoparticles and bulk zinc oxide performed better than hydropriming; in comparison with bulk zinc oxide priming and nanopriming, nanopriming with a diameter of 1 to 100 nm showed better efficiency. Increasing the drought stress intensity led to a significant rise in the number of abnormal seedlings. Priming especially with zinc oxide (nano and bulk), modulated the drought stress effects in non-stressed conditions and mild to moderate stresses (-2 to -4 bar). However, under severe stress (-8 bar), drought stress damage was not compensated by priming. The results also showed that increasing the priming time had a significant effect on seedling length, germination rate and longitudinal index of seedling vigor. However, increasing the duration from 12 to 24 did not have a significant effect on this increasing trend.
Conclusions: Rapid and optimal germination plays a crucial role in the formation of a reliable crop with excellent yield. Zinc oxide nanoparticles significantly enhance germination, biochemical activities, and seedling growth of chickpea, however, determining the optimal dosage and application method is critical to maximize benefits while avoiding potential toxicity associated with excessive nanoparticle use.
Highlights
Method: A three-factorial experiment based on a completely randomized design was conducted with three replications on germination and seedling growth characteristics of chickpea cultivar Kasra. The factors included: 1) seed priming at 4 levels (priming with zinc oxide in the form of nanoparticles 1-100 and 40-60 nm, priming with bulk zinc oxide, and hydropriming), 2) priming duration at 3 levels (6, 12 and 24 hours) and 3) drought stress levels at 4 levels (no stress, -2, -4 and -8 bar using polyethylene glycol 6000).
Results: The results showed that drought stress had a significant effect on all measured variables. Although priming with nanoparticles and bulk zinc oxide performed better than hydropriming; in comparison with bulk zinc oxide priming and nanopriming, nanopriming with a diameter of 1 to 100 nm showed better efficiency. Increasing the drought stress intensity led to a significant rise in the number of abnormal seedlings. Priming especially with zinc oxide (nano and bulk), modulated the drought stress effects in non-stressed conditions and mild to moderate stresses (-2 to -4 bar). However, under severe stress (-8 bar), drought stress damage was not compensated by priming. The results also showed that increasing the priming time had a significant effect on seedling length, germination rate and longitudinal index of seedling vigor. However, increasing the duration from 12 to 24 did not have a significant effect on this increasing trend.
Conclusions: Rapid and optimal germination plays a crucial role in the formation of a reliable crop with excellent yield. Zinc oxide nanoparticles significantly enhance germination, biochemical activities, and seedling growth of chickpea, however, determining the optimal dosage and application method is critical to maximize benefits while avoiding potential toxicity associated with excessive nanoparticle use.
Highlights
- Seed priming with zinc oxide nanoparticles (1–100 nm in diameter) was more effective than using bulk zinc oxide or nanoparticles sized 40–60 nm.
- Under no-stress and mild to moderate drought stress conditions (-2 to -4 bar), priming — particularly with zinc oxide (both nano and bulk forms) — alleviated drought-induced damage.
- Drought stress up to -2 bar did not significantly affect the germination percentage of chickpea seeds compared to the non-primed control.
Ali Shayanfar, Bita Oskouei,
Volume 12, Issue 1 (4-2025)
Volume 12, Issue 1 (4-2025)
Abstract
Objective: This study aimed to simulate the effects of thermal shocks from crop residue burning and soil temperatures on the germination and dormancy of flixweed (Descurainia sophia) seeds under laboratory conditions.
Method: A factorial experiment was conducted based on a completely randomized design with four replications. Heat shock treatments were applied to flixweed seeds at 80°C and 120°C for durations of 2.5 and 7.5 minutes. Subsequently, the treated seeds were incubated for 14 days under constant temperatures of 7, 15, 20, 25, 30, and 35°C, as well as under an alternating temperature regime of 20/30°C (16h/8h). Various seed germination and dormancy indices were then recorded and analyzed.
Results: The optimum temperature for flixweed seed germination was 7°C. Increasing the germination temperature to 35°C significantly reduced both the germination percentage and rate, while significantly increasing the percentages of dead and dormant seeds. Compared to constant temperatures above 7°C, alternating temperature treatments combined with light exposure enhanced the germination rate and percentage and decreased seed dormancy. Both elevated substrate temperatures and heat shock treatments increased the percentage of dead seeds, particularly at 30 and 35°C under the 120°C heat shock treatment. The highest percentage of normal seedlings was observed at 7°C and under the 20/30°C alternating temperature regime. Applying an 80°C heat shock for 2.5 minutes improved both the germination percentage and rate, and reduced secondary dormancy compared to the control at the same incubation temperature. In contrast, heat shocks at higher temperatures (120°C) led to increased seed mortality and reduced both germination and dormancy.
Conclusions: Heat shock treatments did not induce secondary dormancy (thermo-dormancy) in flixweed seeds; instead, they primarily influenced the germination percentage, germination rate, and seed mortality. The induction of secondary dormancy in flixweed seeds was observed only as a result of elevated substrate temperatures above 7°C. Thermo-dormancy caused by exposure to higher temperatures can be mitigated through alternating temperature treatments combined with light, thereby enhancing both the germination percentage and rate.
Highlights
Method: A factorial experiment was conducted based on a completely randomized design with four replications. Heat shock treatments were applied to flixweed seeds at 80°C and 120°C for durations of 2.5 and 7.5 minutes. Subsequently, the treated seeds were incubated for 14 days under constant temperatures of 7, 15, 20, 25, 30, and 35°C, as well as under an alternating temperature regime of 20/30°C (16h/8h). Various seed germination and dormancy indices were then recorded and analyzed.
Results: The optimum temperature for flixweed seed germination was 7°C. Increasing the germination temperature to 35°C significantly reduced both the germination percentage and rate, while significantly increasing the percentages of dead and dormant seeds. Compared to constant temperatures above 7°C, alternating temperature treatments combined with light exposure enhanced the germination rate and percentage and decreased seed dormancy. Both elevated substrate temperatures and heat shock treatments increased the percentage of dead seeds, particularly at 30 and 35°C under the 120°C heat shock treatment. The highest percentage of normal seedlings was observed at 7°C and under the 20/30°C alternating temperature regime. Applying an 80°C heat shock for 2.5 minutes improved both the germination percentage and rate, and reduced secondary dormancy compared to the control at the same incubation temperature. In contrast, heat shocks at higher temperatures (120°C) led to increased seed mortality and reduced both germination and dormancy.
Conclusions: Heat shock treatments did not induce secondary dormancy (thermo-dormancy) in flixweed seeds; instead, they primarily influenced the germination percentage, germination rate, and seed mortality. The induction of secondary dormancy in flixweed seeds was observed only as a result of elevated substrate temperatures above 7°C. Thermo-dormancy caused by exposure to higher temperatures can be mitigated through alternating temperature treatments combined with light, thereby enhancing both the germination percentage and rate.
Highlights
- The response of the flixweed soil seed bank to crop residue burning was simulated under laboratory conditions.
- Secondary dormancy induction in flixweed seeds was assessed in response to both heat shock and incubation temperature treatments.
- Thermo-dormancy in flixweed seeds was induced exclusively by elevated substrate temperature, not by heat shock treatments.
Mohammad Ahmadi, Tohid Ali-Abbasi, Salim Farzaneh,
Volume 12, Issue 1 (4-2025)
Volume 12, Issue 1 (4-2025)
Abstract
Objective: The particular susceptibility of rapeseed during the sensitive stages of germination and seedling establishment doubly underscores the urgent need to develop efficient and cost-effective management strategies to counteract salinity stress. In this regard, seed pre-treatment technology has gained attention as a promising and novel strategy to enhance plant resilience against environmental stresses from the very first stages of growth.
Method: This research was designed and conducted to comprehensively evaluate and compare the effects of applying various natural growth stimulants—including amino acids (at three concentrations: 2, 4, and 6 g kg-1 of seed), humic acid (at three concentrations: 3, 6, and 9 g kg-1 of seed), and seaweed extract (at three concentrations: 3, 6, and 9 g kg-1 of seed) both individually and in combination with the hydropriming method on the improvement of germination indices, growth, and biochemical responses of rapeseed (cv. Hyola 50) under different levels of salinity stress (0, -2, -4, -6, and -8 bar).
Results: Salinity stress had a significant inhibitory effect (p < 0.01) on most measured traits. With increasing stress levels up to -8 bar, root dry weight decreased by 65.3%, emergence percentage decreased by 32%, and germination rate decreased by 63.3% compared to the control treatment (no stress). In contrast, the activity of catalase enzyme, an indicator of oxidative stress, increased by 114%, demonstrating the plant's defensive response to unfavorable conditions. In this study, the combined treatment of hydropriming with humic acid (6 g kg-1 of seed) was identified as the most effective method, with a 153% difference in leaf dry weight compared to the worst treatment. This treatment comprehensively demonstrated a protective role against salinity stress by increasing root dry weight by 13.8%, catalase enzyme activity by 10.5%, and germination rate by 14%, while maintaining the chlorophyll index.
Conclusions: It can be concluded that pre-treating rapeseed seeds with natural growth stimulants, particularly as combined hydropriming treatments with amino acids (4 g kg-1 seed) and humic acid (6 g kg-1 seed), is a low-cost, user-friendly breeding strategy and represents a practical and implementable approach for farmers.
Highlights
Method: This research was designed and conducted to comprehensively evaluate and compare the effects of applying various natural growth stimulants—including amino acids (at three concentrations: 2, 4, and 6 g kg-1 of seed), humic acid (at three concentrations: 3, 6, and 9 g kg-1 of seed), and seaweed extract (at three concentrations: 3, 6, and 9 g kg-1 of seed) both individually and in combination with the hydropriming method on the improvement of germination indices, growth, and biochemical responses of rapeseed (cv. Hyola 50) under different levels of salinity stress (0, -2, -4, -6, and -8 bar).
Results: Salinity stress had a significant inhibitory effect (p < 0.01) on most measured traits. With increasing stress levels up to -8 bar, root dry weight decreased by 65.3%, emergence percentage decreased by 32%, and germination rate decreased by 63.3% compared to the control treatment (no stress). In contrast, the activity of catalase enzyme, an indicator of oxidative stress, increased by 114%, demonstrating the plant's defensive response to unfavorable conditions. In this study, the combined treatment of hydropriming with humic acid (6 g kg-1 of seed) was identified as the most effective method, with a 153% difference in leaf dry weight compared to the worst treatment. This treatment comprehensively demonstrated a protective role against salinity stress by increasing root dry weight by 13.8%, catalase enzyme activity by 10.5%, and germination rate by 14%, while maintaining the chlorophyll index.
Conclusions: It can be concluded that pre-treating rapeseed seeds with natural growth stimulants, particularly as combined hydropriming treatments with amino acids (4 g kg-1 seed) and humic acid (6 g kg-1 seed), is a low-cost, user-friendly breeding strategy and represents a practical and implementable approach for farmers.
Highlights
- A comprehensive investigation of the effects of three types of natural growth stimulants (amino acid, humic acid, and seaweed extract) individually and combined with hydropriming to achieve a synergistic effect.
- Providing strong quantitative evidence of the mechanism of action through simultaneous measurement of growth and biochemical indices and demonstrating the critical principle of dose-response.
- Emphasizing the practical and cost-effective nature of the method for farmers, aiming to convert saline lands into productive areas as a sustainable solution.
Hasan Keshavarz, Barmak Jafari Haghighi, Abdolreza Jafari, Hamidreza Miri, Hamidreza Ebrahimi,
Volume 12, Issue 1 (4-2025)
Volume 12, Issue 1 (4-2025)
Abstract
Objective: This study was conducted to investigate the effect of seed priming, sulfur application, and a biofertilizer containing Thiobacillus on seed yield and the fatty acid composition of sesame. Due to the importance of sesame as a valuable oilseed crop, evaluating the combined role of nutritional and biological management in improving both quantitative and qualitative traits of the crop holds significant importance.
Method: A field experiment was conducted during the 2023–2024 growing season in Fasa County, Fars Province, Iran, as a factorial arrangement in a randomized complete block design with three replications. Treatments included four seed priming methods (no prime, hydropriming, calcium chloride at 2.5% and 5%), four levels of sulfur application (0, 100, 200, and 300 kg ha-1), and three levels of Thiobacillus inoculation (0, 2, and 4 kg ha-1). Sesame cultivar ‘Darab 2’ was sown at a density of 40 plants m-2. Thousand-seed weight, dry matter and seed yield were measured. Oil quality was evaluated through fatty acid methyl ester analysis using gas chromatography according to ISIRI and AOAC standards.
Results: Seed priming, sulfur application, and Thiobacillus biofertilization significantly affected all the studied traits. Both two-way and three-way interactions were significant at 1% and 5% levels. The highest plant dry weight (23,580 kg ha-1) was observed in the treatment of hydro-priming combined with 300 kg ha-1 sulfur. Additionally, the highest thousand seed weight (5.33 g) and seed yield (2610 kg ha-1) were recorded in the treatment of hydro-priming combined with 300 kg ha-1 sulfur and 4 kg ha-1 Thiobacillus. The highest oil percentage (52.2%) and protein content (25.10%) were obtained in the treatment of 5% calcium chloride priming combined with 300 kg ha-1 sulfur and 4 kg ha-1 Thiobacillus. The fatty acid analysis revealed that integrated treatments increased the content of unsaturated fatty acids (linoleic, oleic, alpha-linolenic) while decreasing saturated fatty acids (palmitic and stearic).
Conclusions: The integrated use of seed priming (especially 5% calcium chloride or hydropriming), high-dose sulfur, and Thiobacillus inoculation significantly improved sesame seed yield, and oil quality. These practices enhanced nutrient uptake, stimulated microbial activity, and promoted biosynthesis of health-beneficial fatty acids.
Highlights
Method: A field experiment was conducted during the 2023–2024 growing season in Fasa County, Fars Province, Iran, as a factorial arrangement in a randomized complete block design with three replications. Treatments included four seed priming methods (no prime, hydropriming, calcium chloride at 2.5% and 5%), four levels of sulfur application (0, 100, 200, and 300 kg ha-1), and three levels of Thiobacillus inoculation (0, 2, and 4 kg ha-1). Sesame cultivar ‘Darab 2’ was sown at a density of 40 plants m-2. Thousand-seed weight, dry matter and seed yield were measured. Oil quality was evaluated through fatty acid methyl ester analysis using gas chromatography according to ISIRI and AOAC standards.
Results: Seed priming, sulfur application, and Thiobacillus biofertilization significantly affected all the studied traits. Both two-way and three-way interactions were significant at 1% and 5% levels. The highest plant dry weight (23,580 kg ha-1) was observed in the treatment of hydro-priming combined with 300 kg ha-1 sulfur. Additionally, the highest thousand seed weight (5.33 g) and seed yield (2610 kg ha-1) were recorded in the treatment of hydro-priming combined with 300 kg ha-1 sulfur and 4 kg ha-1 Thiobacillus. The highest oil percentage (52.2%) and protein content (25.10%) were obtained in the treatment of 5% calcium chloride priming combined with 300 kg ha-1 sulfur and 4 kg ha-1 Thiobacillus. The fatty acid analysis revealed that integrated treatments increased the content of unsaturated fatty acids (linoleic, oleic, alpha-linolenic) while decreasing saturated fatty acids (palmitic and stearic).
Conclusions: The integrated use of seed priming (especially 5% calcium chloride or hydropriming), high-dose sulfur, and Thiobacillus inoculation significantly improved sesame seed yield, and oil quality. These practices enhanced nutrient uptake, stimulated microbial activity, and promoted biosynthesis of health-beneficial fatty acids.
Highlights
- Seed priming, sulfur application, and Thiobacillus inoculation significantly increased sesame seed yield.
- Combined treatments improved seed oil quality by increasing unsaturated fatty acids and reducing saturated ones.
Simin Haghanifar, Marjan Diyanat, Aidin Hamidi, Fereidoon Ghasemkhan-Ghajar, Elias Soltani,
Volume 12, Issue 2 (10-2025)
Volume 12, Issue 2 (10-2025)
Abstract
Objective: Given the extent of saline lands worldwide, this study aimed to evaluate the tolerance of Persian Camelthorn (Alhagi camelorum) to salinity stress during germination and early growth stages following seed hardness removal, to promote its cultivation as a forage plant for livestock.
Method: A factorial experiment was conducted in a completely randomized design with four replications in 2023 at the Seed Analysis Laboratory of the Seed and Plant Certification and Registration Institute. Factors included: (1) seed population (Gorgan and Mashhad), (2) salinity levels (0, 100, and 200 mM NaCl), and (3) seed hardness removal treatments (immersion in 100°C water for 1 minute and concentrated sulfuric acid for 35 minutes). Germination percentage, mean daily germination time, seedling vigor index, stem length, and superoxide dismutase (SOD) activity were measured.
Results: Salinity stress significantly reduced germination percentage, as well as stem length. Germination indices differed significantly between control and 200 mM treatments. Increasing salinity decreased mean daily germination in all treatments. The highest salinity level reduced stem length by 65% and 44% in the Mashhad population, and 71% and 64% in the Gorgan population, compared to control, respectively. Treatment with 100°C water and 200 mM salinity increased SOD activity by 56.9% in the Mashhad population and 45.4% in the Gorgan population. Sulfuric acid treatment with 200 mM salinity increased SOD activity by 25.4% and 13.0% in Mashhad and Gorgan populations, respectively.
Conclusions: Sulfuric acid treatment for 35 minutes significantly increased germination percentage in both populations compared to 100°C water treatment. The greater increase in SOD activity in the Mashhad population suggests higher salinity tolerance, making it a suitable candidate for cultivation in saline lands.
Highlights
- Sulfuric acid (35 min) and hot water (100°C, 1 min) effectively broke seed dormancy and improved germination.
- The Mashhad population was more salt-tolerant than the Gorgan population.
- Both populations countered salinity through enhanced antioxidant enzyme activity.
Abohassan Farhang Sardrodi, Malihe Sadeghizadeh, Ali Khatibi, Ghasemali Abdollahi Koshki, Alireza Jamali Kharanjani,
Volume 12, Issue 2 (10-2025)
Volume 12, Issue 2 (10-2025)
Abstract
Objective: This study aimed to distinguish early stimulatory effects from inhibitory responses in basil seeds under alkaline stress (sodium carbonate).
Method: An experiment based on completely randomized design was conducted with four Na₂CO₃ levels (0, 5, 15, and 30 mM) and three replications. Germination dynamics were assessed via germination percentage (GP), germination rate (GR), and mean germination time (MGT). Post-germination growth was evaluated using seed vigor index (SVI), biomass allocation (fresh/dry weights), and total biomass index (TBI). Salt tolerance indices (STI) were calculated, and multivariate analyses (correlation heatmap and PCA) were performed.
Results: A clear hormetic response was observed. At 5 mM, TBI reached its maximum (STI.TBI = 2.28), indicating significant growth stimulation. Concentrations above 15 mM caused a sharp decline in all indices. At 30 mM, germination capacity and early growth were severely reduced, along with decreased germination rate and disrupted biomass allocation. PCA explained 97.75% of total variance and clearly differentiated treatments. The heatmap showed a strong correlation (r = 0.962) between germination rate and seedling establishment.
Conclusions: A stimulatory threshold exists at 5 mM Na₂CO₃. The transition from hormesis to toxicity occurs between 5 and 15 mM, reflecting a limited adaptability range for Damavand basil. TBI and PCA-based clustering are reliable indicators for evaluating salt tolerance. These findings emphasize the need for careful soil and water management in alkaline environments.
Highlights
Method: An experiment based on completely randomized design was conducted with four Na₂CO₃ levels (0, 5, 15, and 30 mM) and three replications. Germination dynamics were assessed via germination percentage (GP), germination rate (GR), and mean germination time (MGT). Post-germination growth was evaluated using seed vigor index (SVI), biomass allocation (fresh/dry weights), and total biomass index (TBI). Salt tolerance indices (STI) were calculated, and multivariate analyses (correlation heatmap and PCA) were performed.
Results: A clear hormetic response was observed. At 5 mM, TBI reached its maximum (STI.TBI = 2.28), indicating significant growth stimulation. Concentrations above 15 mM caused a sharp decline in all indices. At 30 mM, germination capacity and early growth were severely reduced, along with decreased germination rate and disrupted biomass allocation. PCA explained 97.75% of total variance and clearly differentiated treatments. The heatmap showed a strong correlation (r = 0.962) between germination rate and seedling establishment.
Conclusions: A stimulatory threshold exists at 5 mM Na₂CO₃. The transition from hormesis to toxicity occurs between 5 and 15 mM, reflecting a limited adaptability range for Damavand basil. TBI and PCA-based clustering are reliable indicators for evaluating salt tolerance. These findings emphasize the need for careful soil and water management in alkaline environments.
Highlights
- Mild sodium carbonate stress (5 mM) stimulated seedling growth in Damavand basil, confirming a hormetic response.
- PCA effectively discriminated stress levels, explaining 97.8% of total variance.
- Total Biomass Index (TBI) was identified as the most reliable indicator of alkaline stress tolerance.
- Severe stress (30 mM) impaired biomass allocation and germination kinetics, leading to poor seedling establishment.
Haniyeh Saadat, Mohammad Sedghi,
Volume 12, Issue 2 (10-2025)
Volume 12, Issue 2 (10-2025)
Abstract
Objective: This study aimed to investigate the reduction of adverse effects of salinity stress on germination and related traits of wheat (Triticum aestivum cv. Sain) through seed priming with chitosan nanoparticles.
Method: The experiment was conducted as a factorial arrangement based on a completely randomized design with three replications at the University of Mohaghegh Ardabili in 2025. Treatments included four salinity levels (0, 50, 100, and 150 mM NaCl) and four levels of chitosan nanoparticles (0, 0.1, 0.2, and 0.5% weight/volume dissolved in 1% acetic acid).
Results: Germination percentage (GP) and plumule fresh weight (PFW) decreased at 150 mM salinity compared to the control (without salinity), but seed priming with 0.5% chitosan nanoparticles improved GP and PFW at the same salinity level by about 20% and 50%, respectively, compared to no chitosan application. Radicle fresh weight (RFW), radicle dry weight (RDW), plumule dry weight (PDW), seedling length vigor index (SLVI), and seedling weight vigor index (SWVI) in the 0.5% chitosan nanoparticle treatment without salinity increased by 77, 72, 83, 76, and 89%, respectively, compared to hydropriming under 150 mM salinity. With increasing salinity, proline content increased, but the application of 0.5% chitosan nanoparticles increased this trait by 32% compared to hydropriming. Protein content under no salinity and priming with 0.5% chitosan nanoparticles increased by about 76% compared to hydropriming under 150 mM salinity. Also, soluble sugar content in the treatment with 0.5% chitosan nanoparticles under 150 mM salinity increased by about 84% compared to hydropriming without salinity.
Conclusions: The results showed that the use of 0.5% chitosan nanoparticles improved germination indices and biochemical traits of wheat seeds under salinity stress.
Highlights
Method: The experiment was conducted as a factorial arrangement based on a completely randomized design with three replications at the University of Mohaghegh Ardabili in 2025. Treatments included four salinity levels (0, 50, 100, and 150 mM NaCl) and four levels of chitosan nanoparticles (0, 0.1, 0.2, and 0.5% weight/volume dissolved in 1% acetic acid).
Results: Germination percentage (GP) and plumule fresh weight (PFW) decreased at 150 mM salinity compared to the control (without salinity), but seed priming with 0.5% chitosan nanoparticles improved GP and PFW at the same salinity level by about 20% and 50%, respectively, compared to no chitosan application. Radicle fresh weight (RFW), radicle dry weight (RDW), plumule dry weight (PDW), seedling length vigor index (SLVI), and seedling weight vigor index (SWVI) in the 0.5% chitosan nanoparticle treatment without salinity increased by 77, 72, 83, 76, and 89%, respectively, compared to hydropriming under 150 mM salinity. With increasing salinity, proline content increased, but the application of 0.5% chitosan nanoparticles increased this trait by 32% compared to hydropriming. Protein content under no salinity and priming with 0.5% chitosan nanoparticles increased by about 76% compared to hydropriming under 150 mM salinity. Also, soluble sugar content in the treatment with 0.5% chitosan nanoparticles under 150 mM salinity increased by about 84% compared to hydropriming without salinity.
Conclusions: The results showed that the use of 0.5% chitosan nanoparticles improved germination indices and biochemical traits of wheat seeds under salinity stress.
Highlights
- Seed priming with 0.5% chitosan nanoparticles improved some germination indices of wheat (cv. Sain) seeds under salinity stress.
- Seed priming with 0.5% chitosan nanoparticles increased proline, protein, and soluble sugar contents in wheat (cv. Sain) seedlings.
Davar Molazem,
Volume 12, Issue 2 (10-2025)
Volume 12, Issue 2 (10-2025)
Abstract
Objective: This study investigated the effectiveness of electromagnetic priming in improving drought tolerance of Hashemi rice (Oryza sativa L.) during germination and early seedling growth.
Method: A factorial experiment based on a completely randomized design with three replications was conducted in 2024 at the Islamic Azad University, Astara Branch. Rice seeds were exposed to magnetic fields (0, 50, 100, and 150 mT) for 20 or 40 minutes and then subjected to four PEG-induced drought levels (0, -2, -5, and -10 bar). Germination indecies and physiological traits including proline, MDA, and chlorophyll were measured after 25 days.
Results: The mean comparison of interaction effects showed that in the absence of an electromagnetic field (0 mT), increasing drought stress from 0 to −10 bar significantly decreased germination percentage from 97% to 66.53%, germination rate from 0.43 to 0.19 seeds day⁻¹, radicle length from 65.80 to 28.66, and plumule length from 45.33 to 17.33 mm. However, application of a 100 mT magnetic field considerably limited these reductions to approximately 24% and 49% for germination percentage and seedling length, respectively, indicating an improvement of more than 20% in maintaining germination capacity. With increasing drought stress, proline content significantly rose from 1.01 to 8.34 µmol g⁻¹ FW, and MDA increased from 4.40 to 8.00 mmol g⁻¹ FW, while chlorophyll a decreased from 0.64 to 0.17 and chlorophyll b from 0.75 to 0.32 mg g⁻¹ FW. In the control (0 mT), chlorophyll a exhibited a 72% reduction, whereas at 100 mT this reduction was limited to 56.8%, reflecting approximately 15% improvement. Regression analysis revealed that the effect of magnetic field intensity on the measured traits depended strongly on the drought stress level and did not follow a consistent pattern; under severe stress (−10 bar), no significant linear relationship was detected.
Conclusions: The application of magneto-priming within the optimal range may serve as a simple, eco-friendly, and practical approach to enhance drought tolerance in rice seeds and improve early seedling establishment under unfavorable environmental conditions. In the present study, the treatment with 100 mT for 40 minutes resulted in improved seedling vigor indices for both length and weight. These findings offer new perspectives for the application of physical technologies in agricultural stress management and provide a basis for further field-based studies.
Highlights
Method: A factorial experiment based on a completely randomized design with three replications was conducted in 2024 at the Islamic Azad University, Astara Branch. Rice seeds were exposed to magnetic fields (0, 50, 100, and 150 mT) for 20 or 40 minutes and then subjected to four PEG-induced drought levels (0, -2, -5, and -10 bar). Germination indecies and physiological traits including proline, MDA, and chlorophyll were measured after 25 days.
Results: The mean comparison of interaction effects showed that in the absence of an electromagnetic field (0 mT), increasing drought stress from 0 to −10 bar significantly decreased germination percentage from 97% to 66.53%, germination rate from 0.43 to 0.19 seeds day⁻¹, radicle length from 65.80 to 28.66, and plumule length from 45.33 to 17.33 mm. However, application of a 100 mT magnetic field considerably limited these reductions to approximately 24% and 49% for germination percentage and seedling length, respectively, indicating an improvement of more than 20% in maintaining germination capacity. With increasing drought stress, proline content significantly rose from 1.01 to 8.34 µmol g⁻¹ FW, and MDA increased from 4.40 to 8.00 mmol g⁻¹ FW, while chlorophyll a decreased from 0.64 to 0.17 and chlorophyll b from 0.75 to 0.32 mg g⁻¹ FW. In the control (0 mT), chlorophyll a exhibited a 72% reduction, whereas at 100 mT this reduction was limited to 56.8%, reflecting approximately 15% improvement. Regression analysis revealed that the effect of magnetic field intensity on the measured traits depended strongly on the drought stress level and did not follow a consistent pattern; under severe stress (−10 bar), no significant linear relationship was detected.
Conclusions: The application of magneto-priming within the optimal range may serve as a simple, eco-friendly, and practical approach to enhance drought tolerance in rice seeds and improve early seedling establishment under unfavorable environmental conditions. In the present study, the treatment with 100 mT for 40 minutes resulted in improved seedling vigor indices for both length and weight. These findings offer new perspectives for the application of physical technologies in agricultural stress management and provide a basis for further field-based studies.
Highlights
- Germination responses to magnetic fields are nonlinear and depend on field intensity and drought stress level.
- Electromagnetic priming at 100 mT for 40 minutes mitigates drought stress effects by up to 20% in germination traits.
- Magneto-priming offers a simple, eco-friendly strategy for improving rice seedling establishment under drought conditions.
Zahra Zare Mahmoudabad, Roghayeh Zolfaghari, Payam Fayyaz,
Volume 12, Issue 2 (10-2025)
Volume 12, Issue 2 (10-2025)
Abstract
Objective: The oak forests of the Zagros region, as a valuable ecosystem, have experienced extensive degradation in recent years due to various factors, including climate change and human activities. The rehabilitation of these forests requires the production of resilient, high-quality saplings. This study aimed to investigate the effect of the fungus Trichoderma harzianum as a biological growth-promoting agent on the seed emergence and early growth of Quercus brantii seedlings in order to evaluate its efficacy in improving the growth and physiological parameters of this species under both greenhouse and natural forest conditions.
Method: Seeds collected from mother trees in the Yasouj forest site were planted in pots (under greenhouse conditions) and pits (in the forest), and a biological treatment using a Trichoderma fungal solution was applied to the seeds. Subsequently, emergence, growth, and physiological traits of the seedlings were measured and compared throughout the growing season.
Results: The results showed that under greenhouse conditions, the Trichoderma treatment significantly increased the seed emergence percentage, photosystem performance index (PI), and chlorophyll index compared with the control group. However, no significant differences were observed in other growth traits, such as height, leaf number, and the dry and fresh weights of plant organs. In contrast, under natural forest conditions, the emergence percentage in the control group was significantly higher than in the Trichoderma treatment, and other growth traits showed no significant differences between the two groups. Furthermore, a significant positive correlation was observed between physiological indices (such as performance index and chlorophyll) and some growth traits (such as root length and stem dry weight) under greenhouse conditions.
Conclusions: The findings of this study indicate that the effect of Trichoderma fungus on Persian oak is complex and depends on environmental conditions (as evidenced by the significant difference between greenhouse and natural forest field conditions) and the host plant species (in comparison with previous studies on other plants). Therefore, conducting long-term field studies with different Trichoderma isolates and concentrations is recommended to achieve more practical results in Zagros restoration programs.
Highlights:
Method: Seeds collected from mother trees in the Yasouj forest site were planted in pots (under greenhouse conditions) and pits (in the forest), and a biological treatment using a Trichoderma fungal solution was applied to the seeds. Subsequently, emergence, growth, and physiological traits of the seedlings were measured and compared throughout the growing season.
Results: The results showed that under greenhouse conditions, the Trichoderma treatment significantly increased the seed emergence percentage, photosystem performance index (PI), and chlorophyll index compared with the control group. However, no significant differences were observed in other growth traits, such as height, leaf number, and the dry and fresh weights of plant organs. In contrast, under natural forest conditions, the emergence percentage in the control group was significantly higher than in the Trichoderma treatment, and other growth traits showed no significant differences between the two groups. Furthermore, a significant positive correlation was observed between physiological indices (such as performance index and chlorophyll) and some growth traits (such as root length and stem dry weight) under greenhouse conditions.
Conclusions: The findings of this study indicate that the effect of Trichoderma fungus on Persian oak is complex and depends on environmental conditions (as evidenced by the significant difference between greenhouse and natural forest field conditions) and the host plant species (in comparison with previous studies on other plants). Therefore, conducting long-term field studies with different Trichoderma isolates and concentrations is recommended to achieve more practical results in Zagros restoration programs.
Highlights:
- First study on the effect of Trichoderma harzianum on Persian oak (Quercus brantii), addressing a key knowledge gap in Zagros forest restoration.
- Simultaneous greenhouse and field trials revealed environment-dependent effects of Trichoderma, confirming the necessity of field experiments.
- Limited positive and negative effects challenge the belief that Trichoderma is always a growth promoter, emphasizing species-specific and native approaches.
Maryam Hashemvand, Mohammad Sedghi,
Volume 12, Issue 2 (10-2025)
Volume 12, Issue 2 (10-2025)
Abstract
Objective: This study aimed to investigate the effects of seed priming with silicon on germination and biochemical responses of maize (Zea mays L. SC 704) under different pH levels of the growth medium.
Method: The experiment was conducted as a factorial arrangement within a completely randomized design (CRD) with three replications. Treatments consisted of four priming levels: control (distilled water) and silicon (as sodium silicate) at concentrations of 50, 100, and 150 mg L-1, and three pH levels of the growth medium (5, 6.5, and 8). The measured traits included germination indices (percentage and rate), seedling growth (fresh weight, vigor weight, and length), ion leakage (relative electrolyte leakage, REL), and biochemical indices (activities of α-amylase and protease, soluble sugar content, total protein, and silicon uptake)
Results: Deviation from the optimal pH (6.5) toward acidic (pH 5) or alkaline (pH 8) conditions significantly reduced germination and growth indices while increasing ion leakage. Seed priming with silicon, particularly at 150 mg L-1, markedly mitigated the adverse effects of pH changes. Under acidic conditions (pH 5), this treatment increased germination percentage by 63.19% compared to the non-silicon control at the same pH, reduced relative electrolyte leakage (REL), and significantly enhanced α-amylase and protease activities, soluble sugar content, total protein, and silicon uptake. The interaction between silicon and pH was significant only for germination rate, highlighting the specific role of silicon in accelerating germination under unfavorable pH conditions.
Conclusions: Seed priming with silicon at 150 mg L-1 effectively enhances germination capability and reinforces the physiological and biochemical status of maize seeds under non-optimal pH conditions, particularly acidic stress. This approach holds significant promise for improving field establishment in soils with suboptimal pH.
Highlights
Method: The experiment was conducted as a factorial arrangement within a completely randomized design (CRD) with three replications. Treatments consisted of four priming levels: control (distilled water) and silicon (as sodium silicate) at concentrations of 50, 100, and 150 mg L-1, and three pH levels of the growth medium (5, 6.5, and 8). The measured traits included germination indices (percentage and rate), seedling growth (fresh weight, vigor weight, and length), ion leakage (relative electrolyte leakage, REL), and biochemical indices (activities of α-amylase and protease, soluble sugar content, total protein, and silicon uptake)
Results: Deviation from the optimal pH (6.5) toward acidic (pH 5) or alkaline (pH 8) conditions significantly reduced germination and growth indices while increasing ion leakage. Seed priming with silicon, particularly at 150 mg L-1, markedly mitigated the adverse effects of pH changes. Under acidic conditions (pH 5), this treatment increased germination percentage by 63.19% compared to the non-silicon control at the same pH, reduced relative electrolyte leakage (REL), and significantly enhanced α-amylase and protease activities, soluble sugar content, total protein, and silicon uptake. The interaction between silicon and pH was significant only for germination rate, highlighting the specific role of silicon in accelerating germination under unfavorable pH conditions.
Conclusions: Seed priming with silicon at 150 mg L-1 effectively enhances germination capability and reinforces the physiological and biochemical status of maize seeds under non-optimal pH conditions, particularly acidic stress. This approach holds significant promise for improving field establishment in soils with suboptimal pH.
Highlights
- Silicon priming improved germination, rate and vigor at all pH levels, especially pH 5.
- Silicon (150 mg L-1) reduced electrolyte leakage and membrane damage under pH stress.
- Silicon enhanced α-amylase, protease, soluble sugars and total protein in seedlings.
- Silicon benefits were pH-independent, ensuring robust stress alleviation during germination.
Fatemeh Fath Fathabadi, Marzieh Etehadpour, Mohadeseh Shamsaddin Saied,
Volume 12, Issue 2 (10-2025)
Volume 12, Issue 2 (10-2025)
Abstract
Objective: This study was conducted to evaluate the effects of seed priming with abiotic stimulants, including salicylic acid, proline, γ-aminobutyric acid (GABA), and melatonin, on improving salt stress tolerance in Calendula officinalis L.
Methods: The experiment was carried out under controlled laboratory conditions using a factorial arrangement in a completely randomized design with three replications. Treatments consisted of four salinity levels (0, 3, 6, and 9 dS m-1) and six seed priming treatments: non-primed control, hydropriming (distilled water), salicylic acid (1.5 mM), proline (100 mg L-1), GABA (10 mM), and melatonin (100 µM). Seeds were primed for 24 h in darkness at 20°C prior to exposure to salinity stress. Parameters evaluated included germination percentage and rate, seedling vigor index, root and shoot length, and dry weight of roots and shoot.
Results: Increasing salinity levels significantly reduced all measured germination and growth traits. Germination percentage decreased by 6.7%, 18.9%, and 24.5% at 3, 6, and 9 dS m-1, respectively, compared with the control. Seed priming significantly mitigated the adverse effects of salinity stress. Among the tested stimulants, hydropriming consistently improved germination percentage, germination rate, seedling vigor index, and biomass accumulation across all salinity levels, and maintained its positive effect even under severe salinity stress (9 dS m-1). GABA and salicylic acid produced the greatest increases in shoot dry weight, while proline, melatonin, and GABA also enhanced early seedling growth. Under severe salinity, primed plants showed lower performance reduction with increasing salt level, indicating improved stress tolerance.
Conclusions: Overall, seed priming with appropriate abiotic stimulants represents an effective, economical, and environmentally friendly strategy for reducing salinity-induced damage and improving the establishment and productivity of medicinal plants in salt-affected environments. The positive effects of priming treatments were dependent on both the type of stimulant and the severity of salinity stress.
Highlights:
Methods: The experiment was carried out under controlled laboratory conditions using a factorial arrangement in a completely randomized design with three replications. Treatments consisted of four salinity levels (0, 3, 6, and 9 dS m-1) and six seed priming treatments: non-primed control, hydropriming (distilled water), salicylic acid (1.5 mM), proline (100 mg L-1), GABA (10 mM), and melatonin (100 µM). Seeds were primed for 24 h in darkness at 20°C prior to exposure to salinity stress. Parameters evaluated included germination percentage and rate, seedling vigor index, root and shoot length, and dry weight of roots and shoot.
Results: Increasing salinity levels significantly reduced all measured germination and growth traits. Germination percentage decreased by 6.7%, 18.9%, and 24.5% at 3, 6, and 9 dS m-1, respectively, compared with the control. Seed priming significantly mitigated the adverse effects of salinity stress. Among the tested stimulants, hydropriming consistently improved germination percentage, germination rate, seedling vigor index, and biomass accumulation across all salinity levels, and maintained its positive effect even under severe salinity stress (9 dS m-1). GABA and salicylic acid produced the greatest increases in shoot dry weight, while proline, melatonin, and GABA also enhanced early seedling growth. Under severe salinity, primed plants showed lower performance reduction with increasing salt level, indicating improved stress tolerance.
Conclusions: Overall, seed priming with appropriate abiotic stimulants represents an effective, economical, and environmentally friendly strategy for reducing salinity-induced damage and improving the establishment and productivity of medicinal plants in salt-affected environments. The positive effects of priming treatments were dependent on both the type of stimulant and the severity of salinity stress.
Highlights:
- Proline and GABA mitigated salinity effects on marigold germination.
- Hydropriming consistently enhanced biomass under all salinity levels.
- Elicitor effectiveness depended on salinity severity and trait type.
Ramin Zeilabpour, Ali Moradi, Hamidreza Balouchi, Alireza Yadavi, Hojatollah Latifmanesh,
Volume 12, Issue 2 (10-2025)
Volume 12, Issue 2 (10-2025)
Abstract
Objective: Seed aging in oilseeds such as sesame is a major storage challenge, reducing germination quality and seedling vigor. The high-oil cultivar Darab‑1 is highly sensitive to storage conditions (temperature, moisture, and time). In this study, the effects of different Pix concentrations in interaction with temperature, moisture, and storage duration were investigated on germination and biochemical traits of seeds to determine the possibility of improving seed quality stability during storage.
Methods: The experiment was conducted as a four‑factor factorial arrangement in a completely randomized design with three replications. The studied factors were storage temperature (15, 25, and 35°C), seed moisture content (9, 12, and 15%), Pix concentration (0, 3000, and 4500 mg L-1), and storage duration (30, 60, 90, 120, 150, and 180 days). After the storage period, seed physiological traits including germination percentage and rate, root and shoot length, seedling dry weight, vigor index, α‑amylase activity, and electrolyte leakage were measured.
Results: Increasing temperature, moisture, and storage duration accelerated seed aging. After 180 days, electrolyte leakage in control seeds increased from 21.47 to 72.72% when storage temperature rose from 15 to 25°C (at 9% moisture), indicating a 54% increase in membrane leakage, while Pix at 3000 mg/L reduced it by 19–80%. α-amylase activity decreased with seed deterioration, but Pix at 3000 mg/L maintained the highest enzyme activity (15.5 vs. 16.3 nmol seed-1min-1 after 180 days). Germination percentage and rate, seedling length and dry weight, and vigor index also declined with aging; however, Pix treatment, especially at 3000 mg L-1, significantly moderated these reductions.
Conclusions: Storage at high temperature and moisture accelerated sesame seed deterioration, reducing germination and α‑amylase activity while increasing membrane damage. Pix at 3000 mg L-1 was the most effective treatment, maintaining seed vigor and enzyme activity and reducing electrolyte leakage. Therefore, seed treatment with 3000 mg L-1 Pix before storage, especially at 15°C and 9% moisture content, can be recommended as an effective strategy to extend seed longevity and maintain quality during medium term storage.
Highlights:
Methods: The experiment was conducted as a four‑factor factorial arrangement in a completely randomized design with three replications. The studied factors were storage temperature (15, 25, and 35°C), seed moisture content (9, 12, and 15%), Pix concentration (0, 3000, and 4500 mg L-1), and storage duration (30, 60, 90, 120, 150, and 180 days). After the storage period, seed physiological traits including germination percentage and rate, root and shoot length, seedling dry weight, vigor index, α‑amylase activity, and electrolyte leakage were measured.
Results: Increasing temperature, moisture, and storage duration accelerated seed aging. After 180 days, electrolyte leakage in control seeds increased from 21.47 to 72.72% when storage temperature rose from 15 to 25°C (at 9% moisture), indicating a 54% increase in membrane leakage, while Pix at 3000 mg/L reduced it by 19–80%. α-amylase activity decreased with seed deterioration, but Pix at 3000 mg/L maintained the highest enzyme activity (15.5 vs. 16.3 nmol seed-1min-1 after 180 days). Germination percentage and rate, seedling length and dry weight, and vigor index also declined with aging; however, Pix treatment, especially at 3000 mg L-1, significantly moderated these reductions.
Conclusions: Storage at high temperature and moisture accelerated sesame seed deterioration, reducing germination and α‑amylase activity while increasing membrane damage. Pix at 3000 mg L-1 was the most effective treatment, maintaining seed vigor and enzyme activity and reducing electrolyte leakage. Therefore, seed treatment with 3000 mg L-1 Pix before storage, especially at 15°C and 9% moisture content, can be recommended as an effective strategy to extend seed longevity and maintain quality during medium term storage.
Highlights:
- Pix at 3000 mg/L effectively prevented the decline in physiological traits of sesame seeds during storage and maintained germination potential and seed vigor.
- Increased temperature, moisture, and storage duration reduced α‑amylase activity and increased electrolyte leakage, indicating accelerated physiological seed aging.
- Pix treatment improved seed quality under warm and humid storage conditions by reducing electrolyte leakage and enhancing membrane stability, suggesting its practical application for extending seed longevity.
Negin Moein, Rayhaneh Amooaghaie,
Volume 12, Issue 2 (10-2025)
Volume 12, Issue 2 (10-2025)
Abstract
Objective: This research aimed to investigate the effect of treatments such as seed scarification and nitrogenous compounds on seed dormancy breaking, germination indices, and seedling growth of Astragalus adscendens Boiss. & Hausskn.
Method: In the first experiment of this study, the effect of soaking seeds in 95°C boiling water for 5, 10, and 20 minutes, as well as scarification with a razor, on seed germination was investigated based on a completely randomized design. In the second experiment, the effect of scarification with a 50% solution of various chemical compounds (water, hydrochloric acid, sulfuric acid, acetic acid, and hydrogen peroxide) for different durations (2, 5, and 10 minutes) on seed dormancy breaking was evaluated. In the third experiment, the interactive effect of seed scarification with a razor or sulfuric acid and various nitrogenous compounds on seed dormancy breaking and seedling growth of A. adscendens was investigated.
Results: The results of the first and second experiments showed that intact control seeds had only about 20% germination, but 10 minutes of treatment with boiling water and razor scarification increased germination to 60.57% and 70%, respectively. The best values for mean daily germination, peak value, and germination value were obtained with 5 minutes of sulfuric acid treatment, followed by 5 minutes in hydrochloric acid. The results of the third experiment showed that treatment with thiourea, potassium nitrate, and sodium nitroprusside had no significant effect on the germination of intact A. adscendens seeds, but significantly increased the percentage and rate of germination of seeds scarified with a razor or sulfuric acid, as well as the root and shoot length of seedlings. The greatest effect on germination percentage was achieved with the application of sodium nitroprusside (as a nitric oxide-producing compound) on seeds scarified with a razor (90%) or sulfuric acid (79%). Also, potassium nitrate caused the greatest increase in the root length of seedlings from seeds scarified with a razor or sulfuric acid, and the highest shoot length was obtained with the application of sodium nitroprusside.
Conclusion: The obtained results indicate that A. adscendens seeds have both physical and physiological dormancy, and scarification with a razor followed by treatment with sodium nitroprusside is suitable for breaking this dual dormancy.
Highlights
Method: In the first experiment of this study, the effect of soaking seeds in 95°C boiling water for 5, 10, and 20 minutes, as well as scarification with a razor, on seed germination was investigated based on a completely randomized design. In the second experiment, the effect of scarification with a 50% solution of various chemical compounds (water, hydrochloric acid, sulfuric acid, acetic acid, and hydrogen peroxide) for different durations (2, 5, and 10 minutes) on seed dormancy breaking was evaluated. In the third experiment, the interactive effect of seed scarification with a razor or sulfuric acid and various nitrogenous compounds on seed dormancy breaking and seedling growth of A. adscendens was investigated.
Results: The results of the first and second experiments showed that intact control seeds had only about 20% germination, but 10 minutes of treatment with boiling water and razor scarification increased germination to 60.57% and 70%, respectively. The best values for mean daily germination, peak value, and germination value were obtained with 5 minutes of sulfuric acid treatment, followed by 5 minutes in hydrochloric acid. The results of the third experiment showed that treatment with thiourea, potassium nitrate, and sodium nitroprusside had no significant effect on the germination of intact A. adscendens seeds, but significantly increased the percentage and rate of germination of seeds scarified with a razor or sulfuric acid, as well as the root and shoot length of seedlings. The greatest effect on germination percentage was achieved with the application of sodium nitroprusside (as a nitric oxide-producing compound) on seeds scarified with a razor (90%) or sulfuric acid (79%). Also, potassium nitrate caused the greatest increase in the root length of seedlings from seeds scarified with a razor or sulfuric acid, and the highest shoot length was obtained with the application of sodium nitroprusside.
Conclusion: The obtained results indicate that A. adscendens seeds have both physical and physiological dormancy, and scarification with a razor followed by treatment with sodium nitroprusside is suitable for breaking this dual dormancy.
Highlights
- Sulfuric acid or razor scarification breaks physical dormancy more effectively than boiling water in A. adscendens.
- For the first time, scarification + nitrogenous compounds overcame combined dormancy in A. adscendens.
- Razor scarification followed by sodium nitroprusside was the most effective treatment.
Shahrzad Ghabeli, Hamidreza Ebrahimi, Hamidreza Miri, Barmak Jafari Haghighi, Abdolreza Jafari,
Volume 12, Issue 2 (10-2025)
Volume 12, Issue 2 (10-2025)
Abstract
Objective: The objective of this research was to evaluate the effect of temperature, salinity, and seed priming on germination and to determine cardinal germination temperatures (i.e., base, optimum, and maximum) of Camelina seeds.
Method: Experimental treatments included different levels of seed priming (control, hydropriming, priming with gibberellic acid, and brassinosteroid at 50 ppm), salinity (0, 100, and 200 mM), and different temperatures (5, 10, 15, 20, 25, 30, 35, and 40°C). To estimate cardinal temperatures, three nonlinear regression models (dent-like, segmented, and beta) were fitted, and their accuracy was evaluated using RMSE, CV, R², and SE criteria.
Results: The results showed that Camelina seed germination was significantly affected by the interaction of temperature, salinity, and priming treatments, and none of these factors could be interpreted independently. The highest germination percentage and rate were obtained at 20°C under non-saline conditions, particularly with the application of gibberellic acid and brassinosteroid at 50 ppm; whereas the combination of high temperatures (especially 35°C) and 200 mM salinity caused a severe reduction or complete inhibition of germination. Hormonal priming, in addition to increasing germination percentage, reduced the time to 50% germination, thereby increasing germination rate, decreasing base temperature, and improving the thermal tolerance range. Among the three models evaluated, based on RMSE, CV, R², and SE criteria, the segmented and dent-like models were the most suitable for estimating the cardinal temperatures of Camelina. The results also showed that the most effective priming treatment was priming with brassinosteroid.
Conclusion: The use of priming, especially with brassinosteroid and gibberellic acid, can be recommended as an effective strategy to improve Camelina seed establishment under salinity stress and temperature fluctuations. The use of nonlinear regression models, including dent-like, segmented, and beta models, can be effectively used to quantify the response of Camelina seed germination to temperature, salinity, and seed priming. Therefore, by utilizing the output of these models across different temperatures, it is possible to predict the germination rate under various priming treatments and salinity levels.
Highlights:
Method: Experimental treatments included different levels of seed priming (control, hydropriming, priming with gibberellic acid, and brassinosteroid at 50 ppm), salinity (0, 100, and 200 mM), and different temperatures (5, 10, 15, 20, 25, 30, 35, and 40°C). To estimate cardinal temperatures, three nonlinear regression models (dent-like, segmented, and beta) were fitted, and their accuracy was evaluated using RMSE, CV, R², and SE criteria.
Results: The results showed that Camelina seed germination was significantly affected by the interaction of temperature, salinity, and priming treatments, and none of these factors could be interpreted independently. The highest germination percentage and rate were obtained at 20°C under non-saline conditions, particularly with the application of gibberellic acid and brassinosteroid at 50 ppm; whereas the combination of high temperatures (especially 35°C) and 200 mM salinity caused a severe reduction or complete inhibition of germination. Hormonal priming, in addition to increasing germination percentage, reduced the time to 50% germination, thereby increasing germination rate, decreasing base temperature, and improving the thermal tolerance range. Among the three models evaluated, based on RMSE, CV, R², and SE criteria, the segmented and dent-like models were the most suitable for estimating the cardinal temperatures of Camelina. The results also showed that the most effective priming treatment was priming with brassinosteroid.
Conclusion: The use of priming, especially with brassinosteroid and gibberellic acid, can be recommended as an effective strategy to improve Camelina seed establishment under salinity stress and temperature fluctuations. The use of nonlinear regression models, including dent-like, segmented, and beta models, can be effectively used to quantify the response of Camelina seed germination to temperature, salinity, and seed priming. Therefore, by utilizing the output of these models across different temperatures, it is possible to predict the germination rate under various priming treatments and salinity levels.
Highlights:
- Assessing the combined effects of temperature, salinity, and priming on Camelina seed germination.
- Quantifying the impact of seed priming on cardinal temperatures of Camelina under salinity stress.
- Comparing and selecting the superior nonlinear model (dent-like and segmented) for estimating Camelina cardinal temperatures under salinity stress and priming.
Akram Oraki, Ehsan Shahbazi, Keramatollah Saeidi, Fariba Rafiei,
Volume 12, Issue 2 (10-2025)
Volume 12, Issue 2 (10-2025)
Abstract
Objective: This study evaluated the effects of polyethylene glycol (PEG)-induced drought stress on germination traits, seedling growth, and seed vigor across 24 Nigella sativa genotypes to identify drought-tolerant and -sensitive genotypes.
Method: The experiment was a factorial arrangement based on a completely randomized design (CRD) with three replications, conducted at the Crop Physiology Laboratory of Shahrekord University. The factors comprised 24 N. sativa genotypes and five drought levels induced by PEG at osmotic potentials of 0 (distilled water, control), -0.2, -0.3, -0.4, and -0.6 MPa. Measured traits included germination percentage and rate, mean germination time, root and shoot length, seedling length, seedling fresh and dry weight, and seed vigor.
Results: Analysis of variance (ANOVA) revealed that genotype, drought, and their interaction significantly affected all germination and early seedling growth traits. The strongest positive correlations were observed between seed vigor and seedling length, seedling length and root length, and seed vigor and root length. Principal component analysis (PCA) of the nine traits identified three components with eigenvalues >1, accounting for 87.91% of the total variance. Based on the PCA biplot and Ward's hierarchical cluster analysis, the genotypes were classified into three groups: tolerant (genotypes 3, 8, 11, 24), semi-tolerant (genotypes 1, 2, 9, 12, 14, 17), and sensitive (the remaining 14). Multivariate tests (Pillai's trace, Wilks' lambda, Hotelling-Lawley trace, and Roy's largest root) confirmed highly significant differences among the three groups (p < 0.01), validating the classification robustness.
Conclusions: The findings reveal significant genetic diversity among N. sativa genotypes under drought stress. Genotypes 3, 8, 11, and 24, which showed superior germination performance, are recommended for future breeding programs. Furthermore, clustering enables the selection of parental lines with greater genetic distance (e.g., tolerant genotype 3 and sensitive genotype 5) for hybridization, facilitating the genetic analysis of drought tolerance mechanisms and supporting trait improvement efforts.
Highlights:
Method: The experiment was a factorial arrangement based on a completely randomized design (CRD) with three replications, conducted at the Crop Physiology Laboratory of Shahrekord University. The factors comprised 24 N. sativa genotypes and five drought levels induced by PEG at osmotic potentials of 0 (distilled water, control), -0.2, -0.3, -0.4, and -0.6 MPa. Measured traits included germination percentage and rate, mean germination time, root and shoot length, seedling length, seedling fresh and dry weight, and seed vigor.
Results: Analysis of variance (ANOVA) revealed that genotype, drought, and their interaction significantly affected all germination and early seedling growth traits. The strongest positive correlations were observed between seed vigor and seedling length, seedling length and root length, and seed vigor and root length. Principal component analysis (PCA) of the nine traits identified three components with eigenvalues >1, accounting for 87.91% of the total variance. Based on the PCA biplot and Ward's hierarchical cluster analysis, the genotypes were classified into three groups: tolerant (genotypes 3, 8, 11, 24), semi-tolerant (genotypes 1, 2, 9, 12, 14, 17), and sensitive (the remaining 14). Multivariate tests (Pillai's trace, Wilks' lambda, Hotelling-Lawley trace, and Roy's largest root) confirmed highly significant differences among the three groups (p < 0.01), validating the classification robustness.
Conclusions: The findings reveal significant genetic diversity among N. sativa genotypes under drought stress. Genotypes 3, 8, 11, and 24, which showed superior germination performance, are recommended for future breeding programs. Furthermore, clustering enables the selection of parental lines with greater genetic distance (e.g., tolerant genotype 3 and sensitive genotype 5) for hybridization, facilitating the genetic analysis of drought tolerance mechanisms and supporting trait improvement efforts.
Highlights:
- Rapid, cost-effective PEG screening replaces field selection
- Root length as a reliable indicator of seed vigor
- Identifying 4 superior Nigella genotypes for drought tolerance
Related Websites
Site Keywords
Seed Science and Technology, Seed Physiology, Seed Ecology, Modeling, Seed Health, Germination Characteristics, Seed Dormancy, Seed Ageing, Seed Storage, Seed PrimingVote
© 2026 CC BY-NC 4.0 | Iranian Journal of Seed Research
Designed & Developed by : Yektaweb
This work is licensed under a Creative Commons Attribution 4.0 International License.