@article{ 
author = {},  
title = {Investigation of performance and exhaust emissions in direct injection engine using coconut oil biodiesel}, 
abstract ={ In this study, the performance and emission characteristics of a direct injection diesel engine using coconut oil biodiesel were investigated. For this aim, coconut oil was converted to its biodiesel via transesterification approach. Then, the effects of the biodiesel percentage in blend, engine load, and speed on brake power, brake specific fuel consumption (BSFC), nitrogen oxides (NOx), carbon dioxide (CO2), carbon monoxide (CO), and particle matter (PM) have been considered. Fuel blends with various percentages of biodiesel (0%0 - %3%) at various engine speeds and loads were tested. The results indicated that blends of cocunut with diesel fuel provide admissible engine performance on the other side, emissions decreased so much. },  
Keywords = {biodiesel, cocunt, engine performance, emissio},
volume = {1},
Number = {1}, 
pages = {1-7}, 
publisher = {Yasouj University},
title_fa = {بررسی اثر بیو دیزل نارگیل بر عملکرد آلاینده های موتور دیزل},
abstract_fa ={ این مطالعه به بررسی تجربی تأثیر استفاده از بیودیزل نارگیل بر عملکرد و آلاینده های یک موتور پاشش مستقیم دیزل پرداخته شده است. به همین منظور ابتدا روغن نارگیل با روش ترنس استریفیکاسیون به سوخت دیزل تبدیل شد و سپس خواص ترموفیزیکی سوخت تهیه شده استخراج گردید. ترکیبات سوخت با درصد های مختلف بیودیزل و سرعت‌های مختلف موتور مورد آزمایش و تأثیرات درصد بیودیزل و سرعت موتور بر روی توان ترمزی، مصرف سوخت ویژه، اکسیدهای نیتروژن، مونواکسید کربن، دی اکسید کربن و ذرات معلق مورد مطالعه قرار گرفت. نتایج این تحقیق نشان داد که استفاده از بیودیزل سبب کاهش اندک در توان خروجی از موتور می‌شود. همچنین مصرف سوخت ویژه ترمزی در هنگام استفاده از بیودیزل اندکی افزایش می‌یابد. بر اساس نتایج این تحقیق، آلاینده های نظیر مونواکسید کربن، دی اکسید کربن و ذرات معلق در هنگام استفاده از بیودیزل به طرز قابل توجهی کاهش می‌یابد. },
keywords_fa = {بیودیزل, نارگیل, عملکرد موتور, آلاینده‌ها},
url = {http://yujs.yu.ac.ir/jste/article-1-21-en.html},  
eprint = {http://yujs.yu.ac.ir/jste/article-1-21-en.pdf},  
journal = {Journal of Selected Topics in Energy},  
issn = {2588-4891}, 
eissn = {2588-4905}, 
year = {2014}  
}

@article{ 
author = {},  
title = {Effect of Open Windows on Car Drag}, 
abstract ={ Effect of open windows on car drag and consequently on the required power and fuel consumption has been investigated in this study. To do this, a simulated model as possible as similar to the actual model has been considered. For example round angles and side slopes have been considered. The drag caused by aerodynamic forces has been calculated, for different cases. Results show, as the percentage of windows opening increased, the car drag first decreased and then increased such that, the car drag with open windows for a certain percentage is equal to that of the closed windows car. This certain percentage depends on the car velocity. },  
Keywords = {Car drag, Fuel consumption, Car body design.},
volume = {1},
Number = {1}, 
pages = {26-30}, 
publisher = {Yasouj University},
title_fa = {بررسی اثر بازبودن شیشه های خودرو بر مصرف سوخت},
abstract_fa ={ در این تحقیق، اثر باز بودن شیشه‌های خودرو بر نیروی پسا و متعاقباً بر توان لازم و میزان مصرف سوخت مورد بررسی قرار گرفته شده است. برای انجام این کار، مشخصات مدل شبیه سازی شده تا حد ممکن مشا‌به مدل واقعی در نظر گرفته شده‌اند. به عنوان مثال، گوشه های گردشده و شیب جانبی سطوح لحاظ گردیده شده‌اند. برای حالات مختلف، نیروی پسا محاسبه شده و مورد مقایسه قرار گرفته شده است. نتایج نشان می‌دهند که با افزایش میزان باز بودن شیشه، ابتدا توان لازم برای غلبه بر نیروی مقاومت هوا کاهش و سپس افزایش می‌یابد. به طوری که برای درصد معینی که بستگی به سرعت خودرو دارد، این توان معادل توانی است که در حالت بسته بودن شیشه لازم است. },
keywords_fa = {آیرو دینامیک, درگ, الگوریتم ژنتیک},
url = {http://yujs.yu.ac.ir/jste/article-1-24-en.html},  
eprint = {http://yujs.yu.ac.ir/jste/article-1-24-en.pdf},  
journal = {Journal of Selected Topics in Energy},  
issn = {2588-4891}, 
eissn = {2588-4905}, 
year = {2014}  
}

@article{ 
author = {},  
title = {Optimal cross section and elevation in wind catcher structures as a ventilation system in Traditional Iranian Architecture}, 
abstract ={ The limited available energy resources and it basic role in industrial development, employing the renewable sources of energy including wind, sun, water and etcetera as appropriate choice described. Renewable energies are not only economically advisable, but even can contribute to provide a cleaner approach of energy production and healthier environment. Hence, assessment of some old structures such as Middle East wind catcher that are established on the ground of clean energies and adapting them to the modern age demands with optimizing models is noteworthy. This work, by keeping focus on calculus of variation and analysis of the wind load on the wind catcher structures and present an optimal more resistant model. Optimization of the design parameters of wind catcher structures led to a hyperbolic model with least wind catcher surface and a higher stability and strength compared with the older structures of this category. },  
Keywords = {Wind Force, Wind renewable energy, Wind catcher structures, Traditional engineering.},
volume = {1},
Number = {1}, 
pages = {31-39}, 
publisher = {Yasouj University},
title_fa = {مطالعه سازه های بادگیر و بهینه سازی مقطع بادگیر تحت اثر انرژی تجدید پذیر باد به عنوان یک سیستم تهویه مطبوع در معماری قدیمی ایرانی},
abstract_fa ={محدودیت منابع انرژی و نقش اساسی آن در پیشرفتهای صنعتی استفاده از انرژی های تجدید پذیر نظیر باد، خورشید، آب و ... را به عنوان گزینه ای مناسب مطرح کرده است. انرژی های تجدید پذیر علاوه بر مقرون به صرفه بودن، در داشتن محیط زیستی پاک و بدون آلودگی نقش مهمی را ایفاء می کند. از این رو بررسی سازه های قدیمی مانند بادگیر ها که در گذشته استفاده فراوانی داشتند به نحوی که باعث استفاده در عصر مدرن گردد حائز اهمیت بوده و ارائه مدل هایی جدید جهت بهینه سازی آن ها قابل تامل است. در این مقاله با استفاده از ریاضیات تغییرات و آنالیز نیروی باد بر روی بادگیر ها مدلی بهینه ارائه شده که مقاوم تر از مدل های پیشین بوده و از نظر پارامترهای طراحی سازه های بادگیر، خصوصیات بهتری دارند. لذا مدل هذلولی گون در این خصوص ارائه شد. این مدل درحالیکه کمترین سطح در برابر باد را دارد، استحکام و مقاومت آن از بادگیر های پیشین بیشتر بوده و به عنوان مدلی کاربردی جهت برجک بادگیرهای نسل جدید پیشنهاد می گردند.},
keywords_fa = {نیروی باد, انرژی تجدید پذیر, سازه های بادگیر, مهندسی سنتی},
url = {http://yujs.yu.ac.ir/jste/article-1-25-en.html},  
eprint = {http://yujs.yu.ac.ir/jste/article-1-25-en.pdf},  
journal = {Journal of Selected Topics in Energy},  
issn = {2588-4891}, 
eissn = {2588-4905}, 
year = {2014}  
}

@article{ 
author = {},  
title = {Study the effect of volume fraction, size and shape of suspended nanoparticles in nanofluid on cylindrical heat pipe performance}, 
abstract ={Copper oxide nanofluid that is obtained by dispersion of copper oxide nanoparticles in water base fluid is used as heat pipe working fluid. Nanofluids because of having better thermophysical properties in comparison with conventional heat transfer fluids, cause heat pipe performance improvement as an effective heat transfer equipment. In this work, a computational fluid dynamic method (CFD) is used to study the effect of using nanofluid and varying volume fraction, size and shape of suspended nanoparticles in nanofluid on heat pipe thermal performance. The results show thermal resistance reduction and heat pipe performance improvement by using nanofluid in comparison with pure water. Also volume fraction enhancement, nanoparticle’s diameter reduction and using cylindrical nanoparticles cause the evaporator and condenser temperature gradient reduction that in low volume fractions the effect of using nanoparticles with small diameter on heat transfer is more than using non spherical nanoparticles},  
Keywords = {heat pipe, nanofluid, thermal resistance, volume fraction.},
volume = {1},
Number = {1}, 
pages = {40-50}, 
publisher = {Yasouj University},
title_fa = {بررسی اثر کسر حجمی، ان دازه و شکل ذرات معلق در نانوسیال بر عملکرد لوله حرارتی استوانه‌ای},
abstract_fa ={نانوسیال اکسید مس که از پراکنده‌سازی ذرات اکسید مس در سیال پایه آب بدست می‌آید به عنوان سیال عامل لوله حرارتی به کار گرفته شده است. نانوسیالات به دلیل دارا بودن خواص ترموفیزیکی بهتر نسبت به سیالات معمولی انتقال حرارت مانند آب، باعث بهبود عملکرد لوله حرارتی که از ابزارهای موثر در انتقال حرارت می‌باشد، خواهند شد. در تحقیق حاضر، اثرات استفاده از نانوسیال و تغییر کسر حجمی، سایز و شکل ذرات معلق در نانوسیال بر عملکرد گرمایی لوله حرارتی، به روش دینامیک سیالات محاسباتی (CFD) مورد بررسی قرار گرفته است. نتایج بیانگر کاهش مقاومت گرمایی و بهبود عملکرد لوله حرارتی هنگام استفاده از نانوسیال در مقایسه با آب خالص می‌باشد. همچنین افزایش کسر حجمی، کاهش قطر ذرات و استفاده از ذرات با شکل استوانه‌ای کاهش اختلاف دمای اواپراتور و کندانسور را در پی خواهد داشت که در کسر حجمی‌های کم، اثر استفاده از ذرات با قطر کوچک بر میزان انتقال حرارت بیشتر از اثر استفاده از ذرات غیر کروی می‌باشد.},
keywords_fa = {لوله حرارتی, نانوسیال, مقاومت حرارتی, کسر حجمی},
url = {http://yujs.yu.ac.ir/jste/article-1-26-en.html},  
eprint = {http://yujs.yu.ac.ir/jste/article-1-26-en.pdf},  
journal = {Journal of Selected Topics in Energy},  
issn = {2588-4891}, 
eissn = {2588-4905}, 
year = {2014}  
}

@article{ 
author = {},  
title = {Flare gas recovery in a gas refinery}, 
abstract ={ In this paper, the impact of micro bubbles as the second phase in the turbulent flow inside the channel flow has been investigated. The developed turbulent flow inside channel containing micro bubbles has been solved using large eddy simulation. Numerical analysis has been done to survey the impact of micro bubbles on turbulent characteristics derived from carrier flow. Finally, the mechanism of reducing frictional drag force was illustrated. According to the results, increasing the volume fraction of bubbles in the constant diameter will decrease the frictional drag force. Also studying the energy spectrum showed that the energy in the small scales has increased and in the large scales decreased. },  
Keywords = {turbulent flow, drag reduction, micro bubbles},
volume = {1},
Number = {2}, 
pages = {24-29}, 
publisher = {Yasouj University},
title_fa = {کاهش درگ در جریان آشفته داخل کانال با تزریق میکرو حباب},
abstract_fa ={  جریان آشفته، کاهش درگ، میکرو حباب.    در این تحقیق اثر حضور میکروحباب‌ها به عنوان فاز دوم در جریان آشفته داخل کانال بررسی شده است. جریان آشفته توسعه یافته حاوی میکروحباب داخل کانال به روش شبیه سازی گردابه های بزرگ حل شده است. در ادامه، مطالعه ی عددی بر روی اثر میکروحباب ها بر مشخصه های توربولانسی جریان حامل صورت گرفت. در نهایت به بررسی عددی نظریه ارائه شده برای مکانیزم کاهش نیروی درگ اصطکاکی توسط میکروحباب پرداخته شد. با توجه به نتایج بدست آمده مشاهده شد که با افزایش کسر حجمی حباب در قطر ثابت میزان درگ اصطکاکی کاهش پیدا کرده است. با بررسی انرژی طیفی مشاهده شد که انرژی در مقیاس­های کوچک افزایش پیدا کرده است. },
keywords_fa = {جریان آشفته, کاهش درگ, میکرو حباب},
url = {http://yujs.yu.ac.ir/jste/article-1-32-en.html},  
eprint = {http://yujs.yu.ac.ir/jste/article-1-32-en.pdf},  
journal = {Journal of Selected Topics in Energy},  
issn = {2588-4891}, 
eissn = {2588-4905}, 
year = {2014}  
}

@article{ 
author = {},  
title = {Numerical investigation of the effect of injector installation on the performance of blowdown supersonic wind tunnels in the presence of shock waves}, 
abstract ={ Supersonic wind tunnels are strong and useful tools for the detection of the flow physics around flying vehicles. In this work, a blowdown type supersonic wind tunnel with a Mach number of 3 was studied. The required air for the tunnel was supplied by a storage tank containing compressed air. The intended velocity in the test section of the wind tunnel is provided by the high pressure discharge of the air from the storage tank into the atomosphere. The nozzle's geometry has been designed based on the "characteristics" method. Embedding the injector in the wind tunnel provides the opportunity to launch the wind tunnel at lower compression ratios. Since the duration of the experimental data collection is limited in blowdown supersonic wind tunnel, proper design and exploitation of the injector in a way to allow tunnel launching at decreased compression ratios, provides significant influence on the saving the compressed air of the storage tank and increasing the experiment duration. It has been attempted in this work to study the effect of installation of the injector in wind tunnel through assessing the boundary layer and the flow physics inside the wind tunnel. The results show that the injected flow increases the energy level of the low energy boundary layer, so as the energy of the boundary layer in a placed ahead of the injector location is higher than a place before the injector location. This fact results in a decreased required compression ratio for tunnel launching. The physics of the formed flow was studied and physical phenomena such as boundary layer separations, bow shock, barrel shock and mach disk were reported around the injection site },  
Keywords = {supersonic wind tunnel, shock waves, injector, boundary layer},
volume = {1},
Number = {2}, 
pages = {30-41}, 
publisher = {Yasouj University},
title_fa = {بررسی عددی اثر نصب انژکتور بر روی عملکرد تونل های باد مافوق صوت دمشی},
abstract_fa ={  تونل های باد مافوق صوت از ابزار آزمایشگاهی بسیار کاربردی در خصوص آشکارسازی فیزیک جریان در اطراف وسایل پرنده می باشند. در این تحقیق یک تونل باد مافوق صوت دمشی با ماخ هدف 3 مورد مطالعه قرار گرفت. در این تونل ها هوای مورد نیاز توسط یک مخزن ذخیره با هوای فشرده تامین می گردد که از طریق تخلیه این هوای پر فشار به درون اتمسفر، سرعت مورد نیاز در مقطع آزمون تونل باد ایجاد می گردد. هندسه نازل با استفاده از روش مشخصه ها طراحی شده است. تعبیه انژکتور درون تونل باد باعث می گردد که تونل با نسبت فشار کمتری قابلیت راه اندازی داشته باشد. از آنجا که زمان آزمایش و داده برداری در تونل های باد مافوق صوت دمشی محدود می باشد لذا استفاده از انژکتور به نحوی که باعث شود تونل باد با نسبت فشار کمتری استارت شود، کمک شایانی به صرفه جویی در هوای فشرده مخزن و افزایش زمان آزمایش می نماید. در این کار سعی شده است که اثر نصب انژکتور در تونل باد از طریق بررسی لایه مرزی و فیزیک جریان درون تونل باد مورد مطالعه قرار گیرد. نتایج نشان می دهد جریان تزریقی باعث افزایش انرژی لایه مرزی کم انرژی شده، به نحوی که انرژی لایه مرزی پس از محل نصب انژکتور بیشتر از قبل از آن است و از این طریق باعث کاهش نسبت فشار مورد نیاز برای استارت تونل باد می گردد. فیزیک جریان ایجاد شده مورد مطالعه قرار گرفت و پدیده های فیزیکی اعم از جدایش لایه مرزی (Separation)، شاک کمانی (Bow Shock)، شاک بشکه ای  (Barrel Shock)و دیسک ماخ (Mach Disk) در اطراف محل تزریق گزارش گردید.  },
keywords_fa = {تونل باد مافوق صوت, امواج شاک, انژکتور, لایه مرزی},
url = {http://yujs.yu.ac.ir/jste/article-1-31-en.html},  
eprint = {http://yujs.yu.ac.ir/jste/article-1-31-en.pdf},  
journal = {Journal of Selected Topics in Energy},  
issn = {2588-4891}, 
eissn = {2588-4905}, 
year = {2014}  
}

