@article{ 
author = {Rahimi, Mahmood Reza and Safaei, ،Javad and Nikbakht, Masou},  
title = {Investigation of performance and exhaust emissions in direct injection engine using coconut oil biodiesel}, 
abstract ={In this paper, coal combustion process in a bubbling fluidized bed furnace were investigated experimentally. Analysis of experimental data shows that the coal size particles inlet to bed and rate of air injected into the furnace, are determinant parameter in bed temperature and proper combustion in the fluidized bed furnace. The highest temperature of 1050&#176;C was obtained with air flow rate of 12 for the combustion of coal mixture with 75 wt% particles in group 2 and 25 wt% in group 3.},  
Keywords = {Bubbling Fluidized Bed, Combustion, Coal, Temperature distribution},
volume = {2},
Number = {1}, 
pages = {1-19}, 
publisher = {Yasouj University},
title_fa = {مطالعه آزمایشگاهی احتراق زغال‌سنگ در کوره بستر سیال حبابی},
abstract_fa ={در این مقاله فرایند احتراق زغال&#8204;سنگ، در کوره بستر سیال حبابی، به صورت تجربی مورد بررسی قرار گرفت. تحلیل داده&#8204;های تجربی نشان می&#8204;دهند که اندازه ذرات زغال&#8204;سنگ و نرخ هوای تزریق شده به کوره، از پارامترهای تعیین کننده دمای بستر و احتراق مناسب در کوره بستر سیال است. بالاترین دمای بدست آمده در کوره 1050 درجه سانتی&#8204;گراد بوده که در دبی هوای ورودی 12 مترمکعب بر ساعت و مخلوط سوخت با ترکیب %75 درصد وزنیاز ذرات گروه 2 و %25 وزنی از ذرات گروه 3 می&#8204;باشد.},
keywords_fa = {بستر سیال حبابی, احتراق, زغالسنگ, توزیع دما},
url = {http://yujs.yu.ac.ir/jste/article-1-63-en.html},  
eprint = {http://yujs.yu.ac.ir/jste/article-1-63-en.pdf},  
journal = {Journal of Selected Topics in Energy},  
issn = {2588-4891}, 
eissn = {2588-4905}, 
year = {2017}  
}

@article{ 
author = {khaniesfandabad, neda and Oloomi, S.A.A and Mirjalili, S.A.A},  
title = {The Effect of Metallic and Non-metalic Nano-coatings and Polarization of Incident Radiation on Radiation Properties of Nono-coatings}, 
abstract ={The study aimed at investigating radiation properties of multi-layers constructions including underneath layer of silicon, slightly covered by non-metal coating of silicon nitrate and silicon dioxide, and metal coating of gold, silver and cooper in temperature of 25 degrees Celsius and polarized incident radiation. Ray Transfer Matrix model was used to calculate radiation properties of multi-layers constructions as well as experimental expressions of optical constants of slightly covered silicon. The transmission coefficient of metallic coatings in polarization types of P and S and non-polarized status was zero due to low penetration power and high radiation coefficient. In non-metallic coatings, on the other hand, the transmission coefficient increased contributing to the larger penetration depth of electromagnetic waves. The overall results indicated that polarization coefficient of transmission of type P was significantly larger than Type S in non-metallic coatings. Radiation coefficient of metallic coatings was significantly larger in comparison to non-metallic coatings. As the result, they can be used in industries requiring high radiation. The results indicated that in underneath silicon layers, in room temperature and wave length of.4 to.84 micrometer, the absorption and consequently radiation coefficients were insignificant. However, silver coating indicated significantly higher absorption and radiation. In addition, the fluctuation in polarization of the incident ray of P and S type resulted in an increase in emissivity and transmission factors. The findings showed that silver in comparison to gold and cooper revealed significantly higher radiation coefficient. In radiation angle of zero (normal), radiation properties were equal for both types of S and P.},  
Keywords = {Radiation properties, slightly covered silicon, polarization, coherent formulation, multi-layer construction},
volume = {2},
Number = {1}, 
pages = {20-24}, 
publisher = {Yasouj University},
title_fa = {تأثیر نانو پوشش‌های فلزی و غیرفلزی و اثر قطبی‌سازی اشعه ورودی بر روی خواص تشعشعی نانو پوشش‌ها},
abstract_fa ={در این تحقیق خواص تشعشعی ساختارهای چندلایه&#8204;ای، شامل زیرلایه سیلیکون آلاییده&#8204;کم با پوشش&#8204;های غیرفلزی نیتریدسیلیکون و دی&#8204;اکسیدسیلیکون و پوشش&#8204;های فلزی، طلا، نقره و مس، در دمای 25 درجه سانتیگراد و اشعه ورودی پلاریزه، بررسی شد. از روش ماتریس انتقال جهت محاسبه خواص تشعشعی ساختارهای چند لایه&#8204;ای و بیان&#8204;های تجربی برای ثابت&#8204;های نوری سیلیکون آلاییده&#8204;کم استفاده شد. ضریب عبور پوشش فلزی به&#8204;علت کم بودن عمق نفوذ این پوشش&#8204;ها و ضریب بازتاب بالا، در حالت قطبی نوع S و نوع P و غیرقطبی، صفر است. در پوشش&#8204;های غیرفلزی، به&#8204;علت بزرگ&#8204;تر بودن عمق نفوذ موج الکترومغناطیس، ضریب عبور افزایش می&#8204;یابد. به&#8204;طور کلی نتایج بدست آمده نشان می&#8204;دهند که در پوشش&#8204;های غیرفلزی ضریب عبور قطبش نوع P بزرگ&#8204;تر از قطبش نوع S می&#8204;باشد. ضریب بازتاب پوشش&#8204;های فلزی نسبت به پوشش&#8204;های غیرفلزی به&#8204;طور چشمگیری زیاد بوده، به&#8204;طوریکه می&#8204;توان از پوشش فلزی در صنایعی که نیاز به بازتاب زیاد است، استفاده نمود. نتایج نشان می&#8204;دهد، اگرچه زیرلایه سیلیکون در دمای اتاق و بازه طول موج، 4/0 تا 84/0 میکرومتر، دارای ضریب جذب ناچیز و در نتیجه ضریب گسیل ناچیز است، ولی پوشش نقره منجر به جذب و درنتیجه مقداری گسیل گردید. همچنین تغییر قطبش اشعه&#8204;ی ورودی از نوع S به P منجربه افزایش ضریب گسیل می&#8204;شود. نتایج نشان می&#8204;دهد، نقره نسبت به طلا و مس بیشترین ضریب بازتاب را دارا می&#8204;باشد. در زاویه تابش صفر (نرمال)، خواص تشعشعی برای هر دو حالت اشعه ورودی قطبی نوع S و قطبی نوع P یکسان می&#8204;باشد.},
keywords_fa = {خواص تشعشعی, لایه نازک, سیلیکون آلاییده‌کم, قطبی‌سازی اشعه ورودی, فرمولاسیون همدوس},
url = {http://yujs.yu.ac.ir/jste/article-1-36-en.html},  
eprint = {http://yujs.yu.ac.ir/jste/article-1-36-en.pdf},  
journal = {Journal of Selected Topics in Energy},  
issn = {2588-4891}, 
eissn = {2588-4905}, 
year = {2017}  
}

@article{ 
author = {bagheritolabi, hajar and shakarami, m.r. and RokRok, E.},  
title = {Combined Fuzzy-ACO Algorithm for Optimal Reconfiguration and Distributed Generation Allocation}, 
abstract ={This paper presents a new hybrid method for optimal multi-objective reconfiguration simultaneous determining the optimal size and location of Distributed Generation (DG) in a distribution feeder. The purposes of this research are reducing the losses, improving the voltage profile and equalizing the feeder load balancing in a distribution system. Ant Colony Optimization (ACO) approach as a Swarm Intelligence (SI) based algorithm is used to simultaneously reconfigure and identify the optimal capacity and location for installation of DG units in the distribution network. In order to facilitate the algorithm for multi-objective search ability, the optimization problem is formulated for minimizing fuzzy performance indices. The multi-objective optimization problem is transformed into a fuzzy inference system (FIS), where each objective function is quantified into a set of fuzzy objectives selected by fuzzy membership functions. The proposed method is validated using the IEEE 33 bus test system at nominal load. The obtained results prove this combined technique is more accurate and has an efficient convergence property compared to other intelligent search algorithms. Also, the obtained results lead to the conclusion that multi-objective reconfiguration along with placement of DGs can be more beneficial than separate single-objective optimization.},  
Keywords = {Fuzzy Inference System, Multi objective reconfiguration, Distributed Generation, Ant Colony Optimization},
volume = {2},
Number = {1}, 
pages = {34-41}, 
publisher = {Yasouj University},
title_fa = {بازآرایی و تخصیص بهینه تولیدات پراکنده در شبکه‌های توزیع با استفاده از الگوریتم ترکیبی فازی- مورچگان},
abstract_fa ={این مقاله یک روش ترکیبی جهت بازآرایی و جایابی تولیدات پراکنده در فیدرهای شبکه توزیع برق ارائه می&#8204;دهد. هدف این پژوهش بهبود پروفیل ولتاژ، کاهش تلفات و افزایش تعادل بار در شبکه&#8204;های توزیع می&#8204;باشد. از الگوریتم مورچگان جهت تعیین پیکربندی بهینه شبکه و نیز تعیین محل و ظرفیت مناسب نصب واحدهای تولید پراکنده در شبکه توزیع استفاده می&#8204;شود. به منظور بهبود توانایی الگوریتم در ایجاد مصالحه بین&#8204;ترم های مختلف تابع هدف، از تئوری فازی بهره گرفته شده و بر این اساس مسئله بهینه سازی چند منظوره به یک مسئله بهینه سازی تک هدفه تبدیل شده است. تکنیک مورد نظر با استفاده از سیستم تست 33 بأس IEEE در بارهای نامی، سبک و سنگین مورد ارزیابی قرار گرفته است. نتایج به دست آمده نشان می&#8204;دهد که روش پیشنهادی، در بهبود هر سه شاخص تلفات، پروفیل ولتاژ و تعادل بار فیدر عملکرد موثری داشته و همچنین در مقایسه با الگوریتم&#8204;های دیگر موفق&#8204;تر عمل نموده است. همچنین، با مقایسه نتایج به دست آمده می&#8204;توان نتیجه گیری کرد که بازآرایی همزمان با تعیین مکان و ظرفیت بهینه تولیدات پراکنده می&#8204;تواند مفیدتر از بازآرایی یا مکان یابی بهینه تولیدات پراکنده به تنهایی باشد.},
keywords_fa = {الگوریتم مورچگان, بازآرایی, تولید پراکنده, سیستم استنتاج فازی, شبکه توزیع},
url = {http://yujs.yu.ac.ir/jste/article-1-41-en.html},  
eprint = {http://yujs.yu.ac.ir/jste/article-1-41-en.pdf},  
journal = {Journal of Selected Topics in Energy},  
issn = {2588-4891}, 
eissn = {2588-4905}, 
year = {2017}  
}

@article{ 
author = {},  
title = {Investigation of the effects of boundary layer heating on the aerodynamics coefficients of transonic airfoil using the computational fluid dynamics}, 
abstract ={This study aims at investigating aerodynamic coefficients changes by applying a two-dimensional heat flux on the wing in transonic regime. The numerical and experimental researches have shown that heat transfer on the fuselage has a significant impact on reducing drag (force). The current&#160;study aims also at investigating the effects of the heat transfer on aerodynamic coefficients of wing section. Accordingly, the turbulent transonic flow was numerically simulated around RAE2822&#160;transonic&#160;airfoil with two different methods of modeling turbulent flow, namely, k&#8211;&#949; two-equation method and Reynolds stress five-equation model (RSM) and the obtained results were compared with experimental results. After choosing RSM as an appropriate method, subsequent investigations have been carried out with it. By applying heat flux in certain parts of upper and lower airfoil, the flow around it, is modeled and aerodynamic coefficients are extracted for airfoil and investigated. Studies showed that heating below the airfoil surface leads to change of aerodynamic coefficients with increasing the lift to drag ratio&#160;which can reduce fuel consumption and increase endurance of aircraft.},  
Keywords = {Computational fluid dynamics, Turbulent transonic flow, Boundary layer heating, Aerodynamics coefficients},
volume = {2},
Number = {1}, 
pages = {42-48}, 
publisher = {Yasouj University},
title_fa = {بررسی اثرات گرمایش لایه مرزی بر ضرائب آیرودینامیکی ایرفویل گذر صوتی  به کمک دینامیک‌سیالات محاسباتی},
abstract_fa ={در این مقاله مساله تغییرات ضرائب آئرودینامیکی با اعمال شار حرارتی روی بال بصورت دوبعدی و در رژیم گذر صوتی مورد مطالعه قرار گرفته است. در تحقیقات تجربی و عددی انجام شده نشان داده شده است که انتقال حرارت روی بدنه هواپیما تاثیر قابل توجهی روی کاهش نیروی پسای آن دارد. در این تحقیق اثرات انتقال حرارت روی ضرایب آیرودینامیکی مقطع بال مورد بررسی قرار گرفته است. به همین منظور ابتدا جریان مغشوش گذر صوتی حول ایرفویل گذر صوتی RAE2822 با دو روش مختلف مدل سازی جریان آشفته یعنی روش دومعادله ای k-&#949; و روش پنج معادله ای تنشهای رینولدز (RSM) شبیه سازی عددی شده و با نتایج تجربی مقایسه گردیده است. با انتخاب روش RSM به عنوان روش مناسب، بررسی های بعدی با آن روش صورت گرفته است. با اعمال شار حرارتی گرمایشی در قسمتهای مشخصی از بالا و پایین ایرفویل، جریان اطراف آن مدل سازی شده و ضرائب آئرودینامیکی برای ایرفویل استخراج و مورد بررسی قرار گرفت. بررسی ها نشان داد که گرمایش زیر ایرفویل منجر به تغییر ضرائب آئرودینامیکی با افزایش نسبت برآ به پسا می شود که می تواند کاهش مصرف سوخت و افزایش مداومت پروازی هواپیما را بدنبال داشته باشد.},
keywords_fa = {دینامیک سیالات محاسباتی, جریان گذر صوتی مغشوش, گرمایش لایه مرزی, ضرائب آئرودینامیکی},
url = {http://yujs.yu.ac.ir/jste/article-1-46-en.html},  
eprint = {http://yujs.yu.ac.ir/jste/article-1-46-en.pdf},  
journal = {Journal of Selected Topics in Energy},  
issn = {2588-4891}, 
eissn = {2588-4905}, 
year = {2017}  
}

@article{ 
author = {Pournaderi, Pedram and Rasekh, Sepehr},  
title = {Effect of an isothermal wall on the natural convection heat transfer from a horizontal cylinder}, 
abstract ={In this paper, effect of a horizontalisothermal wall on the natural convection heat transfer from a horizontal cylinder is numerically studied.For this purpose, effect of wall when it is located above the cylinder at various Rayleigh numbers and wall vertical positions are studiedand compared with the situation that wall is adiabatic. Fluent software is used to simulate the problem.Comparison of simulation results with available numerical results,confirms the accuracy of simulation. Simulation results show that in low wall distance from the cylinder,the isothermal wall causes an increase in meanNusselt number. By increasing this distance, mean Nusselt number decreases until reaching a minimum value. By more increase of this distance mean Nusselt number increases. Also, it is considered that in the case of isothermal wall Nusseltnumber is higher rather than adiabatic wall.},  
Keywords = {Natural convection, Horizontal cylinder, Isothermal wall},
volume = {2},
Number = {1}, 
pages = {49-55}, 
publisher = {Yasouj University},
title_fa = {اثر دیواره دما ثابت بر روی انتقال حرارت جابجایی آزاد حول یک استوانه افقی},
abstract_fa ={در این مقاله،اثر دیواره دما ثابت افقی بر روی انتقال حرارت جابجایی آزاد حول یک استوانه افقیبه صورت عددی بررسی می&#173;شود.برای این منظور اثر دیواره زمانی که در بالای استوانه قرار دارد در گستره ای از اعداد ریلی و فواصل بین دیواره و استوانه بررسی می&#173;شود و با زمانی که دیواره آدیاباتیک &#173;باشد مقایسه می&#173; گردد.این فرایند با استفاده از نرم&#8204;افزارفلوئنت شبیه سازی می&#173;شود. مقایسه نتایج با کارهای عددی موجود،دقت شبیه سازی انجام شده را تایید می&#173;کند.نتایج شبیه سازی نشان می دهدکه درفواصل کم دیوار نسبت به استوانه، دیواره هم دما باعث افزایش عدد ناسلت میانگین حول استوانهمی شود. با افزایش این فاصله عدد ناسلت میانگین کاهش یافته تا اینکه به یک مقدار کمینه می&#173;رسد و پس از آن با افزایش بیشتر فاصله مقدار عدد ناسلت میانگین افزایش می&#173;یابد. همچنین،ملاحظه می گردد که عدد ناسلت حول استوانه، زمانیکه دیواره هم دما باشد نسبت به حالتی که دیواره آدیاباتیک است بیشتر است.},
keywords_fa = {جابجایی آزاد,استوانه افقی, دیواره دما ثابت},
url = {http://yujs.yu.ac.ir/jste/article-1-51-en.html},  
eprint = {http://yujs.yu.ac.ir/jste/article-1-51-en.pdf},  
journal = {Journal of Selected Topics in Energy},  
issn = {2588-4891}, 
eissn = {2588-4905}, 
year = {2017}  
}

