Search published articles


Showing 3 results for Normal Seedling
Investigating the germination characteristics of Chickpea (Cicer arietinum) in response to titanium dioxide nanoparticles priming and drought stress
Roya Ghorbani, Ali Movafeghi, Ali Ganjeali, Jafar Nabati,
Volume 9, Issue 1 (9-2022)
Abstract
Extended Abstract
Introduction: Drought stress, as abiotic and multidimensional stress, has severe effects on plant growth. One of the new approaches in the management of drought stress is the use of nanoparticles. Nanoparticles infilterate the seeds and increase nutrient and water uptake and ultimately, improve germination. The present research was conducted to evaluate the effects of titanium dioxide nanoparticles on chickpea plant germination factors to modify the negative effects of drought stress.
Materials and Methods: A factorial experiment was conducted in a completely randomized design with four replications on chickpea seeds of Arman cultivar in the Plant Sciences Research Institute of the Ferdowsi University of Mashhad in 2019. Seeds were primed with concentrations of 0, 5, 10, 15, and 20 mg L-1 titanium dioxide for 24 hours. The seeds were cultured in sterilized Petri dishes. Drought stress was applied using polyethylene glycol 6000 with 0, -2, -4 and -8 bar osmotic potentials.
Results: The analysis of variance results showed that the interaction effect of drought stress and titanium dioxide nanoparticles was significant on germination rate, the number of normal seedlings, seed vigor index, germination index, length of seedling, radicle length, and radicle dry weight. All germination traits were inhibited as a result of drought stress. On the other hand, the presence of titanium dioxide nanoparticles partially decreased this inhibition in some traits. Germination percentage, germination rate, normal seedling percentage, seed vigor index, germination index, epicotyl length, radicle length and radicle dry weight decreased as a result of stress.
Conclusion: At all drought stress levels, the concentration of titanium dioxide nanoparticles up to 20 mg L-1 significantly improved traits such as germination percentage, seed vigor index, epicotyl length, and epicotyl dry weight. It seems that nanoparticles can stimulate cell activity and increase the transformation of reserves to translocatable material and consequently, improve germination characteristics. Thus, the application of titanium dioxide nanoparticles up to a concentration of 20 mg L-1 can partially reduce the negative effects of drought stress on the germination characteristics of chickpeas.

Highlights:
1- Germination percentage and seed vigor index of chickpea increased with the application of titanium dioxide nanoparticles up to 20 mg l-1 at all drought stress levels.
2- The radicle length and dry weight of chickpea increased by titanium dioxide nanoparticles.
3- The negative effects of drought stress on chickpea seed germination decreased by titanium dioxide nanoparticles.

Effect of Seed Priming With Bulk and Nanoparticle of Zinc Oxide on the Quality of Chickpea (Cicer arietinum) Germination under Salinity Stress
Nasrin Teimoori, Mohsen Saeidi, Mahmood Khoramivafa, Shahab Khoshkhoi,
Volume 12, Issue 1 (9-2025)
Abstract
Objective: This study aimed to assess the efficiency of Zinc Oxide (ZnO) nanoparticles in mitigating salinity stress effects in comparison with bulk ZnO, and to examine the influence of different priming durations on chickpea seed germination under salinity conditions.
Method: The study was conducted as a factorial experiment in a completely randomized design with three replications on chickpea (Kasra cultivar). The first factor was the priming agent (1-100 nm ZnO nanoparticles, 40-60 nm ZnO nanoparticles, bulk ZnO, and hydro-priming). The second factor was the priming duration (6, 12, and 24 h), and the third factor was the level of salinity stress (0, 20, 40, and 80 mM NaCl). Key indicators related to germination quality and seedling growth were subsequently assessed.
Results: Salinity stress significantly affected the germination percentage, germination rate, mean germination time, mean daily germination, and seedling vigor weight index. The respective values at 0 and 80 mM NaCl were 98.7% vs. 68.4%, 15.6 vs. 10.4 germinated seeds per day, 2.11 vs. 2.39 days, 12.3 vs. 8.56 seeds per day, and 5466 vs. 1853. Salinity stress also significantly increased the root-to-shoot length ratio. Seed priming with 1-100 nm ZnO nanoparticles significantly increased seedling dry weight, shoot dry weight, root dry weight, and consequently, the seedling vigor index compared to other zinc forms and hydro-priming. Furthermore, this treatment reduced the percentage of abnormal seedlings to 20.7% under 80 mM NaCl. Priming durations of 12 and 24 h were superior to 6 h, resulting in a significant increase in seedling and shoot length, seedling and shoot weight, and the seedling vigor length index.
Conclusions: Salinity stress had significant adverse effects on germination and seedling growth characteristics and increased the proportion of abnormal seedlings. However, seed priming exerted a more pronounced positive effect on improving seedling growth and reducing the number of abnormal seedlings. Among the priming treatments, ZnO nanoparticles (1-100 nm) with a priming duration of 12 h were the most effective in enhancing seedling growth and the seedling vigor index, providing clear guidance for future research and applications.

Highlights
  • Seed priming at a salinity level of 20 mM significantly alleviated the adverse effects of salinity on seedling growth parameters.
  • Seed priming of chickpea with zinc nanoparticles (1 to 100 nm) was more effective than other seed priming methods in promoting seedling growth.
  • A priming duration of 12 h was identified as the optimal treatment for maximizing seedling growth and vigor index.

Zinc Oxide Nanoparticles Priming Enhances Germination Characteristics of Chickpea (Cicer arietinum) Seeds under Drought Stress
Nasrin Teimoori, Mohsen Saeidi, Mahmood Khoramivafa, Shahab Khoshkhoy,
Volume 12, Issue 1 (9-2025)
Abstract
Objective: This study aimed to assess the efficiency of zinc oxid (ZnO) nanoparticles in mitigating drought stress effects in comparison with bulk ZnO, and to examine the influence of different priming durations on chickpea seed germination under drought conditions.
Method: A three-factorial experiment based on a completely randomized design was conducted with three replications on germination and seedling growth characteristics of chickpea cultivar Kasra. The factors included: 1) seed priming at 4 levels (priming with zinc oxide in the form of nanoparticles 1-100 and 40-60 nm, priming with bulk zinc oxide, and hydropriming), 2) priming duration at 3 levels (6, 12 and 24 hours) and 3) drought stress levels at 4 levels (no stress, -2, -4 and -8 bar using polyethylene glycol 6000).
Results: The results showed that drought stress had a significant effect on all measured variables. Although priming with nanoparticles and bulk zinc oxide performed better than hydropriming; in comparison with bulk zinc oxide priming and nanopriming, nanopriming with a diameter of 1 to 100 nm showed better efficiency. Increasing the drought stress intensity led to a significant rise in the number of abnormal seedlings. Priming especially with zinc oxide (nano and bulk), modulated the drought stress effects in non-stressed conditions and mild to moderate stresses (-2 to -4 bar). However, under severe stress (-8 bar), drought stress damage was not compensated by priming. The results also showed that increasing the priming time had a significant effect on seedling length, germination rate and longitudinal index of seedling vigor. However, increasing the duration from 12 to 24 did not have a significant effect on this increasing trend.
Conclusions: Rapid and optimal germination plays a crucial role in the formation of a reliable crop with excellent yield. Zinc oxide nanoparticles significantly enhance germination, biochemical activities, and seedling growth of chickpea, however, determining the optimal dosage and application method is critical to maximize benefits while avoiding potential toxicity associated with excessive nanoparticle use.

Highlights
  • Seed priming with zinc oxide nanoparticles (1–100 nm in diameter) was more effective than using bulk zinc oxide or nanoparticles sized 40–60 nm.
  • Under no-stress and mild to moderate drought stress conditions (-2 to -4 bar), priming — particularly with zinc oxide (both nano and bulk forms) — alleviated drought-induced damage.
  • Drought stress up to -2 bar did not significantly affect the germination percentage of chickpea seeds compared to the non-primed control.

 

Page 1 from 1     

© 2026 CC BY-NC 4.0 | Iranian Journal of Seed Research

Designed & Developed by : Yektaweb


This work is licensed under a Creative Commons Attribution 4.0 International License.