Search published articles


Showing 4 results for Ghasemi

Mehri Khesht Zar, Mehran Sharafi Zad, Jafar Ghasemi Ranjbar,
Volume 4, Issue 1 ((Spring and Summer) 2017)
Abstract

To investigate the role of seed size on maize germination characteristics, an experiment was conducted in 2014 in the Laboratory of Registration and Certification of Seeds and Plants, Khuzestan Branch. Treatments included three levels of seed size (control (mixed), large and small) and hybrids at three levels (KSC704, Karun and Mobin). The results of these experiments showed that the hybrid had a significant impact on germination percentage, the rate of germination, vigor index, root and shoot length and dry weight of seedling. In addition, the highest germination (94.3%), the rate of germination (8.4 seeds per day), vigor index (37.6), shoot length (21 cm), root fresh weight (3.1 gr) and dry weight of seedlings (0.59 g) affected by seed size belonged to the Karun hybrid. Generally speaking, in terms of germination and seedling growth, there were differences among the three groups of maize seeds. Out of the hybrids scrutinized, Karun hybrid was a better one in terms of germination and growth of seedlings.

Highlights:
  1.  Due to higher storage capacity, the use of large seeds brings about increases in the seedling germination rate and their establishment in the field
  2. The use of large seeds with more seed vigor decreases competition between seedlings and reduces vapor from the field.

Mahsa Nazer, Seyed Mohammadreza Ehteshami, Masoumeh Salehi, Ali Kafighasemi,
Volume 6, Issue 1 ((Spring and Summer) 2019)
Abstract


Extended Abstract
Introduction: Guar (Cyamopsis tetragonolob) which belongs to fabaceae and leguminosae families is self-pollinating and is indigenous to India and Pakistan. This plant is suitable for growth in dry, damp and sandy soils, and can tolerate saline and relatively alkaline soils. Determining the best time for harvesting seeds and its timing with maximum quality is one of the important issues in the field of seed production management. The changes in the physiological quality of seeds occur during development until seed treatment. The use of high-quality seeds plays an important role in the final yield of crops. The purpose of this study was to determine the most suitable time for harvesting seeds because seed moisture content at harvest time is one of the most important factors affecting seed quality.
Materials and Methods: This research was carried out in July 2013 at Iraqi Research Station in Gorgan, Golestan, Iran in a split-plot design with four replications. The treatments consisted of the time of harvesting the seeds from the mother's base in six stages (with different moisture content) and harvesting places (upper, middle, and bottom pods) so that, starting from the podding, every 7 days, the seeds were removed from the base. The mother was harvested and such traits as germination rate, germination percentage, seedling vigor, seed moisture content, and alpha-amylase activity were calculated. In this research, a logistic model was used to study the changes in germination percentage, germination rate, seedling vigor index and straw index during seed dressing on Guar.
Results: The results of this study showed that the hypothesis that seed reaches its maximum quality at the end of the period of seed filling is confirmed, suggesting that with a moisture content of 30 and 14% in late seed filling period, Guar seeds have the highest quality. In general, the results of the present study confirm that the stages of development and management of Guar seeds on maternal basis have an impact on its quality. In the early stages of growth (humidity 85, 80 and 62 percent), due to prematurity and lack of essential seed structures, the qualitative traits of germination percentage, germination rate, seedling vigor, and strawberry index were low, and with the evolution of essential structures and reduced seed moisture content (58, 30 and 14%), the quality traits increased.
Conclusions: In general, it can be concluded that the best timing for harvesting Guar seeds with the highest quality in Golestan province is when seed moisture reaches 14% or 100 days after planting, and the pods formed at the bottom are the ones with the highest quality.
 
 
Highlights:
  1. To investigate the qualitative indices of Guar seed on the mother plant during seed filling period
  2. To determine the best harvest time and its adaptation with the highest quality of Guar seed

Mohammad Reza Abbasi, Maryam Hajhassani, Abbas Mirakhorli, Ali Hamzehnejad, Azita Nakhaei, Gholamreza Khakizadeh, Ramezanali Alitabar, Rasoul Kanani, Maryam Asadipour, Fatholah Nadali, Hassan Mokhtarpour, Zargham Azizi, Ali Shahriari, Majid Rakhshandeh, Hassan Mostafaei, Sam Safari, Gholamreza Abadouz, Homa Manouchehri, Sahebdad Habibifar, Abdolnaser Mahdipour, Hassan Amirabadizadeh, Sahebdad Habibifar, Narges Kazerani, Seyed Norodin Lesani, Abdoul Houssein Askari, Asadolah Fathi, Mohammad Khamaledin Abbasi, Hassan Ghuchigh, Ali Soltani, Ahmad Ghasemi, Mohammad Javad Karami, Mohammad Zamanyan, Sadigheh Anahid, Mirjamaledin Pourpayghambar, Ali Reza Beheshti,
Volume 7, Issue 1 ((Spring and Summer) 2020)
Abstract



Extended abstract
 Introduction: One of approaches to reach sustainable agriculture is to exploit crop diversity, especially in legume species. Since Melilotus spp. (sweet clover) is a forage crop with a suitable yield especially in the marginal lands; therefore collection and characterization of this germplasm is the first effective step for its conservation and utilization in the country. Few accessions of Melilotus genetic resources had been collected in the National Plant Gene Bank of Iran, before this study.
Materials and Methods: Sweet clover genetic resources were collected all over the country using standard descriptors during two years. Twenty-six characteristics of collection sites were recorded and their descriptive statistics were estimated. The collected materials were planted in an experimental field to identify their life cycle. The seeds of collected germplasms were conserved in mid (2-4 °C)- and long (-20 °C)-terms conditions for further using.
Results: A total of 258 accessions were collected. The geographical altitude of plant origin differed from -11 m in Babolsar to 3090 m in Noor Abad in Lorestan. The materials were mostly collected from non-saline habitats. However, eight accessions were collected from mid to high salinity locations. Taxonomically, M. albus, M. officinalis, and M. indicus were identified with a number of 21, 201 and 36 accessions, respectively. M. dentatus and M. sulcatus, which have been mentioned in the former researches in Iran, were not collected in the recent study.
Conclusion: The collected germplasms from marginal lands (saline, low drainage and low fertility lands) may be tolerant to such marginal lands, therefore they can be exploited for the future research. All M. indicus species were annual; whereas there were annual as well as facultative and obligate biennial accessions in the two other species. Lack of access to M. dentatus and M. sulcatus may be an alarm that they may be threatened species in the country. Collected materials in this study along with the former collection in the Iranian National Plant Gene Bank (80 accessions) have provided high potentials of Melilotus genetic resources for exploitation in the further.

Highlights:
1- The three-fold increase in the Melilotus germplasms in the ex-situ conservation system.
2- Alarm for M. dentatus and M. sulcatus which may be threatened with extinction in the country.

Farhad Ghasemi Aghbash, Iman Pazhouhan, Zahra Rostami,
Volume 9, Issue 1 ((Spring and Summer) 2022)
Abstract

Extended Abstract
Introduction: Iranian oak has the largest forest habitat in the country and has a high position in terms of economy and protection. Recent studies have confirmed the positive effects of carbon nanotubes on the germination and organ growth of herbaceous and woody species. Nanotechnology is an evolving field in all periods of human life and various research is done to use nanomaterials in different fields. Nanotechnology can provide a good medium for the production of plants with suitable characteristics or provide better growth conditions for plants. The aim of this study was to investigate the effect of carbon nanotube treatments, calcium chloride 1% and potassium nitrate 1% on the germination traits of Iranian oak seed (Quercus brantii Lindl).
Materials and Methods: Treatments included carbon nanotubes at five levels (concentrations of 10, 25, 50, 75, and 100 mg/l) for six hours, 1% calcium chloride for 48 hours, potassium nitrate for hours 24 hours and control treatment, which were primed without using any materials and germination traits were tested on them.
Results: According to the results, carbon nanotubes affected germination traits, so that Iranian oak seeds at a concentration of 75 mg/l had the highest germination percentage and rate, and primed seeds with a concentration of 100 mg/l had the highest mean germination time. The lowest germination percentage, speed and mean germination time were related to control seeds.
Conclusion: The results showed that carbon nanotubes with 75 mg/l had the most positive effect on germination traits. Therefore, from an economic point of view, the use of this concentration is recommended for priming oak seeds.

Highlights:
  1. The germination characteristics of Iranian oak seeds were investigated using carbon nanotubes.
  2. The effect of osmopriming and nanopriming on the germination of Iranian oak seeds was compared.


Page 1 from 1     

© 2024 CC BY-NC 4.0 | Iranian Journal of Seed Research

Designed & Developed by : Yektaweb


This work is licensed under a Creative Commons Attribution 4.0 International License.