Search published articles


Showing 5 results for Moghaddam

Seyyed Mohammad Seyyedi, Mohammad Khajeh-Hossieni, Parviz Rezvani Moghaddam, Hamid Shahandeh,
Volume 2, Issue 1 ((Spring and Summer) 2015)
Abstract

In order to investigate the effects of priming with a KH2Po4 solution on emergence and heterotrophic growth of black cumin (Nigella sativa L.) seedling, a series of experiments were conducted at the Faculty of Agriculture, Ferdowsi University of Mashhad, Iran, in 2013 and 2014. A field experiment was conducted as factorial layout based on a randomized complete block design with four replications. The fertilizer resources (vermicompost (V)+Tiobacilus (T), micronized Sulfur (S)+T, V+S+T and control) and three levels of phosphorus (0, 30 and 60 kg.ha-1) were the first and second experimental factors, respectively. In the second experiment, selected treatments (in which showed emergence below 60% in the previous experiment) and seed priming (no priming, hydro priming and three levels of phosphorus (P)-priming as 100, 300 and 500 mM KH2Po4) were the first and second experimental treatments, respectively. Based on the results, the resources of soil amendment (V+T and V+S+T) significantly increased the emergence percentage of black seed (by 50 and 54%, respectively). In addition, seed reserve depletion percentage, seed reserve utilization efficiency and emergence percentage significantly increased by 300 mM KH2PO4 (by 9, 143 and 29%, respectively). There was a significant positive relationship between the weight of mobilized seed P and the emergence percentage of black seeds (R2= 0.90 **).


Bita Oskouei, Eslam Majidi-Hervan, Aidin Hamidi, Foad Moradi, Ali Moghaddam,
Volume 2, Issue 2 ((Autumn & Winter) 2016)
Abstract

This experiment was conducted as a factorial experiment based on a completely randomized design with three replications at two locations: Agricultural and natural resource center of Ardebil province (Moghan) and seed and plant certification and registration institute of Karaj in 2013. The treatments included: planting date in three levels (10-May, 25-May and 9-Jun), seed moisture content at harvest time in four levels (30%, 25, 20 and 15) and seed size in three levels (flat, round and medium). The measured traits were a standard germination test, mean time of germination, seedling weight and length vigor index, germination percent in radical emergence test and germination percent in cold test. The results illustrated that delayed planting caused reduction of seed quality and this reduction was more obvious in delayed harvest (15%), also the reduction rate in round seeds was more than flattered and medium seeds. The minimum percentage of germination and vigor were seen in round seeds of third planting date and moisture harvest by 15%. So it is recommended for corn seed production to sow the seeds before the last week of May and when seed moisture content reached 30 percent, cob harvesting should be started and the harvest not is delayed.


Saman Sheidaei, Hossein Heidari Sharif Abad, Aidin Hamidi, Ghorban Nour Mohammadi, Ali Moghaddam,
Volume 2, Issue 2 ((Autumn & Winter) 2016)
Abstract

In order to assess seed deterioration of soybean at Ardebil province, this study was conducted as a factorial experiment based on randomized complete block design in 2014. The treatments consisted of germination ability, seed moisture content and seed storing conditions. Germination ability treatment was concluded of three germination levels: 80%, 85% and 90%. Also, three rates of seed moisture content including 10%, 12% and 14%; and two seed storing conditions including seed storage of Moghan and controlled storage were considered as second and third treatments. The results indicated that seed quality significantly reduced by increasing the seed moisture content up to 14% and this moisture content was determined as inappropriate moisture for soybean seed storage. Seeds with high moisture content showed significantly lower normal seedlings percent, germination rate and seedling vigor indices. However, there was no significant difference between 12% and 10% seed moisture contents, so it can be concluded that 12% seed moisture content is proper moisture for soybean seed storage. According to the results, enhancement of seed moisture content more than 12% will result in more accelerated deterioration of soybean seed, in a way that seeds with higher moisture content, especially at inappropriate seed storage conditions will lose their quality and will cause yield reduction at field due to low plant density aroused from inadequate seedling emergence.


Seyyed Mahdi Javadzadeh, Parviz Rezvani Moghaddam, Mohammad Banayan-Aval, Javad Asili,
Volume 3, Issue 2 ((Autumn & Winter) 2017)
Abstract

Roselle is an important medicinal and industrial plant of the family of Malvaceae, and is planted in vast areas of Sistan and Baluchestan. In a laboratory study, the effect of varying temperatures on seed germination of Hibiscus sabdariffa was investigated and minimum, optimum and maximum temperatures for its germination were determined in a completely randomized design with four replications.  For this purpose, temperatures 5, 10, 15, 20, 25, 30, 35, 40, 45 and 50°C were considered in each treatment. Cardinal temperatures for germination were determined consistent with three models (i.e., Intersected-lines Model, Five-Parameters Beta Model and Quadratic Polynomial Model). The traits measured were germination percentage, the speed of germination and mean germination time. The temperature effect on all the measured traits was significant. The results of the regression analysis showed that the best model in terms of cardinal point of this plant is the Five-Parameters Beta Model. Given the results of this model, the minimum and the optimal temperatures for the germination of Roselle are 4.04°C, and 29.83° C, respectively.
 


Peyman Aligholizadeh Moghaddam, Gholam Ali Ranjbar, Hammid Najafi-Zarrini, Hosein Shahbazi,
Volume 7, Issue 2 ((Autumn & Winter) 2021)
Abstract

Extended Abstract
Introduction: Germination is one of the most important stages of plant growth that determines the durability, establishment and final yield of crops and in regions that due to drought conditions the growth of plant encounters with problem, improving germination traits count as one of the important breeding strategies. The present study was designed to determine the effect of different levels of osmotic stress on germination and seedling traits of some bread wheat cultivars cultivated in cold regions of Iran.
Materials and Methods: In order to investigate the effect of different levels of osmotic stress on germination characteristics of bread wheat cultivars cultivated in cold regions of Iran, a factorial experiment was conducted based on a completely randomized design with 3 replications in which, the first factor consisted of 20 bread wheat cultivars (including rain fed cultivars as well as end-of-season water stress tolerant varieties) and the second factor consisted of 3 levels of osmotic stress (non-stress, -3 and -6 bar stress). Seedling traits such as coleoptile length, shoot length, shoot weight, root length, root weight, root / shoot ratio, root growth angle, germination speed and the germination stress index (GSI) were evaluated. For the experiment concerning the yield comparison, 20 cultivars mentioned above were compared under non-stress and terminal drought stress conditions.
 
Results: The results showed that the ratio of root/shoot length and weight and shoot weight had the highest sensitivity and the lowest number of roots to osmotic stress. Increasing root length as root weight decreased with increasing stress showed that roots became longer and thinner due to stress. Among the genotypes, Saein, Zare, Pishgam, Sadra, Baran and Mihan had desirable traits and CrossMV17, Homa, Orum and Cross Azar2 had no desirable germination traits. In non-stress conditions, 11 genotypes had high coleoptile length including Hashtrood, Azar 2, Saein, CD62-6, CD91-12, Mihan, Baran, Heydari, Homa, Cross Azar 2 and Zare genotypes. At 3 bar stress, 11 genotypes had the highest coleoptile length, with the highest values being assigned to Hashtrood, Heidari and Saein. At 6 bar stress, CD91-12 and CD62-6 lines, Hashtrood, Homa, Pishgam, and Zare had the highest coleoptile length. At 3 bar stress cross Azar 2, Saein, CD62-6, Gascogen and HD2985 demonstrated the highest germination rate. Furthermore, Cross Azar2, HD2985, Gascogen, CD62-6 and Saein led to the best results, respectively. However, in both 3 and 6 bar stress conditions Saein, Cross Azar2, CD62-6 and HD2985 were superior for germination stress index (GSI). For grain yield under normal conditions, Gascogen, Heidari, Pishgam, Orum and Zarrineh had the highest yield and Baran, HD2985, C-88-4, C-9011 and Cross Azar2 were placed next. Under stress conditions Baran, Gascogen, HD2985, Cross Azar2, Heidari and Zarrineh consisted the highest performance. According to STI index Gascogen, Heidari, HD2985 and Zarrineh were the most tolerant genotypes to drought stress. Cluster analysis grouped the studied genotypes into 2 clusters, the first cluster comprising 13 genotypes Heidari, Mihan, HD2985, Baran, Pishgam, Hashtrood, Cross Azar 2, CD62-6, Gascogen, Azar 2, Saein, Sadra and Zare. The second cluster consisted of 7 genotypes C-88-4, Zarineh, C-90-11, Orum, CD91-12, CrossMV17 and Homa. Genotypes of cluster 1 were superior in terms of germination traits such as shoot length, coleoptile length, root length and root weight and reduced root/shoot ratio.
Conclusion: Significant differences in all studied traits among genotypes indicated sufficient genetic variation for selection in germination traits. Results showed that Saein, Zare, Pishgam, Sadra, Baran and Mihan cultivars had desirable germination traits and were superior to other genotypes.

Highlights:
1- The tested genotypes are either newly named or advanced lines and have not been studied for germination traits.
2-The growth angle trait of seed roots through filter paper has received little attention in studies.


Page 1 from 1     

© 2024 CC BY-NC 4.0 | Iranian Journal of Seed Research

Designed & Developed by : Yektaweb


This work is licensed under a Creative Commons Attribution 4.0 International License.